The Panorama Antennas C23FP-1SP-GNSS is a 1 m coaxial cable assembly terminated with an FME male connector at one end and an SMA male connector at the other. It is built from Panorama's CS23 cable, a low-loss coax with a 5 mm diameter that Panorama specifies as equivalent to RG58/AU. The assembly carries GNSS labels so the navigation feed can be identified at a glance. That labelling matters in installations where several coax runs terminate at the same device. Routers, gateways and telematics units often have multiple antenna ports side by side, and a clearly marked GNSS cable reduces the chance of swapping leads during installation or maintenance. With an FME male plug and an SMA male plug, the C23FP-1SP-GNSS connects an FME female lead or port to a device's SMA female antenna port. The 1 m length suits short jumpers, such as from a bulkhead or patch point to equipment in the same cabinet, or from a nearby antenna lead to a device mounted close by, keeping excess cable to a minimum. Panorama publishes a datasheet for the CS23 cable used in this assembly. For integrators building multi-antenna systems, the C23FP-1SP-GNSS provides a short, clearly identified GNSS connection.