Route a Cell 3 cellular connection over 4 m using a FAKRA D female-to-male cable assembly. The female FAKRA D connector terminates one end, while the opposite end uses a male FAKRA D connector. This fixed connector-gender arrangement supports installations that need to bridge two corresponding FAKRA D connection points without adding an adapter at either end. FAKRA connectors use mechanical keying to prevent mismatched connection families from being coupled. The D key designation is therefore a material fit criterion: both mating interfaces must be FAKRA D and must have the required opposite connector gender. The 4 m length gives installers a defined cable run for routing between cellular equipment and its connection point while retaining the specified connector arrangement end to end. Panorama C32FAKDJ-4FAKDP-C3 is the Cell 3 cable position with a 4 m length, FAKRA D female termination, and FAKRA D male termination. Check the connector key, mating gender, required cable path, and Cell 3 position before installation. Its end-to-end configuration is the important distinction when selecting a replacement or extension cable for an existing cellular hardware connection.