The DNFCDC3P is a daisy chain fan cord used to wire tube axial fans inside racks, cabinets and enclosures. It carries three molded female standard fan plugs on a single 24.00 in (610 mm) lead, so one run of wire can feed a group of fans instead of running a separate cord to each one. It is intended for integrators, panel builders and facilities teams adding or replacing enclosure cooling fans.

The cord is built from SPT-1 x 18/2 type wire rated 300V and 105 degrees C. Each of the three fan connectors is a molded female standard fan plug measuring 0.91" x 0.68", oriented at 45 degrees so the connector clears the fan housing and adjacent hardware. The connectors are positioned 12" apart along the run, with 2 x 12" wire leads between them and a 24" wire lead section as shown on the part drawing.

DNFCDC3P is supplied without a 115VAC plug, making it suited to installations where the cord is terminated into a switch, fan controller or other wiring point rather than plugged into a receptacle. For applications that need a 115VAC plug on a three-connector daisy chain, other part numbers in the DNFC series list that option.

• Lead length: 24.00 in (610 mm)
• Fan connectors: Qty 3, 45 degree, 12" apart
• 115VAC plug: No

Shipping weight is 0.14 lbs (0.06 kg). The part is RoHS and REACH compliant, classified under ECCN EAR99 and tariff code 8537.10.9170, with country of origin TW. It is not USMCA compliant. Data is subject to change without notice.