Search: VEC Electronics — Page 153

Search: "VEC Electronics"

Relevance

7,968 products

120x120x59mm General Purpose ABS Project Box, Black

Hammond Manufacturing · MPN: 1591USBK

Out of Stock

General purpose ABS economy version, UL94 HB, black
Square 120 x 120 x 59 mm body, no flanges
Card guides accept 1.5 mm (0.062") PCBs
Black #4 self-tapping lid screws

Request A Quote

188x120x82mm Black Diecast Aluminum Enclosure

Hammond Manufacturing · MPN: 1590EBK

Out of Stock

Textured black polyester powder paint; lasts even after machining
Nominal 188 x 120 x 82 mm with 77.00 mm inside height
Six black cover screws for 6-32 UNC factory-tapped holes
IP54 lap joint lid; IP65 with 1590EGASKET kit

Request A Quote

180x154x51mm Flame Retardant Black Instrument Case

Hammond Manufacturing · MPN: 1598CBK

Out of Stock

Flame retardant ABS clam shell body rated UL94 V-0, in black
M3 Phillips machine screws into tapped brass bushings for repeated assembly and disassembly
1.6 mm (0.064") brushed aluminum front and rear panels, 5052-H32 alloy
Ordering size 7.09 in (180 mm) x 6.06 in (154 mm) x 2.01 in (51 mm); board up to 140.67 mm x 166.90 mm

Request A Quote

140x66x28mm Light Gray ABS Dual-Panel Enclosure

Hammond Manufacturing · MPN: 1593XGY

Out of Stock

140 x 66 x 28 mm (5.5 x 2.6 x 1.1 in) double-ended hand held enclosure
Includes flat and contoured plastic end panels (4 panels total)
IP54 rated with no battery door
Max recommended P.C. board 130.66 x 56.61 mm

Request A Quote

Transparent Blue Handheld Enclosure, Battery Door

Hammond Manufacturing · MPN: 1593PTBU

Out of Stock

Transparent blue ABS shell with satin texture
Battery compartment with "three snap" long-life door
3.6 x 2.6 x 1.1 in (91 x 66 x 28 mm) ergonomic hand-held shape
Max recommended PCB 48.89 x 59.73 mm; #4 self-tapping mounting

Request A Quote

115x65x40 mm Clear Lid Polycarbonate Enclosure

Hammond Manufacturing · MPN: RZ0203C

Out of Stock

Clear polycarbonate lid keeps LEDs and displays visible
Slim 115 x 65 x 40 mm light gray polycarbonate body
Designed to meet IP65 with tongue & groove gasket
UL94 V-2, rated -40 °C to +130 °C

Request A Quote

Green 112x61x38mm Diecast Stomp Box Enclosure

Hammond Manufacturing · MPN: 1590BSGR

Out of Stock

Green glossy polyester powder coat matched to RAL 6024, applied at the factory
Rugged diecast aluminum alloy box and lid, 112 x 61 x 38 mm (series table size)
Inside dimensions 106.47 mm x 54.97 mm x 38.00 mm per the drawing
Maximum P.C. board size 52.97 mm x 104.47 mm; side wall draft angle 2° or less

Request A Quote

80 mm Round Black ABS Snap-Fit Enclosure

Hammond Manufacturing · MPN: 1551SNAP13BK

Out of Stock

Unvented, closed housing designed to meet IP30
Nominal 80 mm diameter x 20 mm round enclosure in black ABS plastic
Holds a PC board up to 73.5 x 73.5 mm on (4) molded-in standoffs
Snap-fit base and cover, no hardware required, reopens repeatedly

Request A Quote

120x78x43mm Black Aluminum Enclosure, Metal Ends

Hammond Manufacturing · MPN: 1455K1201BK

Out of Stock

120 x 78 x 43 mm (4.72 x 3.07 x 1.69 in) black anodized extruded aluminum body
Metal end plates: two colour-matched aluminum end panels plus two black open bezels
Internal extruded slots hold PC boards horizontally; designed for 75 mm wide boards, max board 119 x 74 mm
Removable sliding plate included

Request A Quote

51x51x25mm Diecast Aluminum Box, Flanged Base

Hammond Manufacturing · MPN: 1590LLBF

Out of Stock

Welded flanged bottom plate for surface mounting
Flange 78.99 x 36.88 mm; 3.96 mm holes on 67.72 x 25.40 mm centres
Slim 51 x 51 x 25 mm (1.99 x 1.99 x 0.98 in) body
Inside 45.63 x 45.63 x 21.00 mm; P.C. boards up to 44.83 mm square

Request A Quote

Green 120x94x38mm Painted Diecast Stomp Box

Hammond Manufacturing · MPN: 1590BB2GR

Out of Stock

Green glossy polyester powder coat matched to RAL 6024, applied at the factory
Nominal 4.72 in (120 mm) x 3.70 in (94 mm) x 1.50 in (38 mm) (120 x 94 x 38 mm) rectangular diecast body
Inside space 113.77 mm x 88.27 mm x 33.50 mm (L x W x H) per drawing
Diecast aluminum alloy box and lid: tough yet easy to machine

Request A Quote

92x92x42 mm Black Square Diecast Enclosure

Hammond Manufacturing · MPN: 1590YBK

Out of Stock

Textured black polyester powder paint; black screws included
Square 92 x 92 x 42 mm, no mounting flanges
Inside 85.17 x 85.17 x 36.30 mm
P.C. boards up to 84.17 x 84.17 mm

Request A Quote

Purple Octagon Painted Diecast Stomp Box

Hammond Manufacturing · MPN: 1590STPCPR

Out of Stock

Purple glossy polyester powder coat matched to RAL 4008
Octagon outline: 2.24 in (57 mm) to 5.24 in (133 mm) wide, 5.24 in (133 mm) long
Max. P.C. board 125.58 mm x 125.58 mm; side wall draft angle 2° or less
Includes box, lid and 4 cover screws (6-32 UNC)

Request A Quote

220x125x51.5mm Blue Aluminum Enclosure, Metal Ends

Hammond Manufacturing · MPN: 1455Q2201BU

Out of Stock

220 x 125 x 51.5 mm extruded aluminum enclosure, blue anodized finish
Takes PC boards up to 219 x 119.5 mm; extrusion designed for 120 mm wide boards
PC boards slide horizontally into internal slots extruded into the body
Removable sliding plate; body minimum thickness 0.06 in (1.5 mm)

Request A Quote

140 x 220 mm Economy Long-Slope Console, Gray ABS

Hammond Manufacturing · MPN: 1599KSTLGY

Out of Stock

140 x 220 mm footprint, 46 mm rear and 20 mm front height (long slope)
General purpose ABS box and lid, UL94 HB flame rating (economy version), light gray finish
Maximum P.C. board 211 x 131 mm; PC board standoffs on both the inside top and bottom
#4 self-tapping cover screws, 42-57 ozf.in (30-40 cN.m) recommended torque

Request A Quote

112x61x31mm IP65 Black Diecast Enclosure, Flanged Lid

Hammond Manufacturing · MPN: 1590WBFLBK

Out of Stock

Black textured polyester powder paint with black screws included
Flanged lid for wall mounting, four 3.50 mm [0.138 in] holes
Designed to meet IP65 with the included loose silicone gasket
Compact nominal 112 x 61 x 31 mm, 138.00 mm [5.433 in] across flange

Request A Quote

93x39x31 mm IP65 Watertight Flanged Box, Natural

Hammond Manufacturing · MPN: 1590WAF

Out of Stock

Water-tight, designed to meet IP65; silicone gasket included
Welded flanged bottom plate for surface mounting
Compact 93 x 39 x 31 mm; 121.16 mm overall across the flange
PC boards up to 86.8 x 32.7 mm; inside 87.80 x 33.70 x 27.40 mm

Request A Quote

120x120x34mm Natural Diecast Aluminum Enclosure

Hammond Manufacturing · MPN: 1590Q

Out of Stock

Square 120 x 120 x 34 mm (4.72 x 4.72 x 1.34 in) diecast aluminum box and lid
Inside space 113.27 x 113.77 x 28.90 mm; PC boards up to 112.82 x 112.82 mm
Designed to meet IP54 with lap joint lid construction against dust and splashing water
Unpainted natural aluminum, vibra finished with no sharp edges

Request A Quote

Natural 192x112x61mm IP65 Flanged-Base Diecast Box

Hammond Manufacturing · MPN: 1590WR1F

Out of Stock

IP65 water-tight version with silicone gasket supplied loose (not pre-installed)
Size 7.55 in x 4.39 in x 2.4 in (192 mm x 112 mm x 61 mm)
Inside dimensions 184.42 mm [7.261 in] x 104.42 mm [4.111 in], inside height 56.50 mm [2.224 in]
Max. PC board 102.42 mm x 182.42 mm (length x width as listed)

Request A Quote

222x146x105 mm Natural Watertight Diecast Aluminum Box

Hammond Manufacturing · MPN: 1550WH

Out of Stock

222 x 146 x 105 mm overall including lid; inside box 212.84 mm x 136.84 mm
IP66 rated with the supplied EVA foam gasket (lid screws torqued at 55 cN.m)
Die-cast aluminum alloy: tough yet easy to machine
Natural vibra finish: smooth surface, no sharp edges

Request A Quote

Black Aluminum End Panels for 1455C, 10-Pack

Hammond Manufacturing · MPN: 1455CALBK-10

Out of Stock

Pack of 10 aluminum end panels for 1455C enclosures
Black anodized finish; also offered in clear, blue or red
For use with 1455 metal end plate enclosures (paired with open plastic bezels)
Accessory panels and bezels allow mixing and matching of colours

Request A Quote

220x125x30.5mm Black Aluminum Enclosure, Plastic Ends

Hammond Manufacturing · MPN: 1455P2202BK

Out of Stock

220 x 125 x 30.5 mm extruded aluminum body in a black anodized finish
Accepts PC boards up to 219 mm long x 119.5 mm wide; extrusion designed for 120 mm wide boards
Boards slide horizontally into internal slots extruded into the body
IP54 rated; removable sliding plate included

Request A Quote

90x90x38mm ABS Flanged IP66 Watertight Enclosure

Hammond Manufacturing · MPN: 1555EF17GY

Out of Stock

90 x 90 x 38 mm (3.54 x 3.54 x 1.50 in) square body, not including flanges
IP66 tested general purpose ABS, IK07 impact rating
Flanged base with 5.00 mm holes for wall mounting
DIN rail tabs molded into the lid

Request A Quote

140mm Gray Handheld Case with Battery Door

Hammond Manufacturing · MPN: 1593YALGY

Out of Stock

140 x 66 x 28 mm hand held instrument enclosure in light gray ABS with a satin texture
Battery compartment with long life "three snap" battery door
One removable flat aluminum front panel, 1.63 mm thick
Inside space 96.30 mm L x 60.39 mm W x 21.90 mm H for a PCB

Request A Quote

Search — VEC Electronics