Wilson 1/2 in. Coaxial Cable, 500 ft. Spool for WilsonPro Repeaters (952006)

The Wilson 1/2 in. Coaxial Cable (952006) is a 500 ft. spool of heavy-duty coax built to connect antennas to WilsonPro cellular repeaters with low signal attenuation. Its high-efficiency design carries more of the captured signal to the repeater, and more of the boosted signal out to the serving antennas, than thinner cable over the same distance. The corrugated copper outer conductor lets the cable run through buildings without kinking, which protects performance where runs turn corners, climb risers or cross long ceiling spans. The cable supports frequencies up to 8.8 GHz. It is intended for buildings where plenum cable is not a requirement. If code calls for plenum-rated cable, choose Wilson's 1/2-inch plenum cable (952003) instead. The spool ships with bare ends so installers can cut each run to length and terminate it on site using 1/2-inch air dielectric connectors and tools. This suits commercial repeater projects in warehouses, retail spaces, industrial sites and offices, where antenna positions vary and exact lengths matter for the link budget. A manufacturer spec sheet is available as a datasheet for project documentation.