The WilsonPro Enterprise 4330R Rack Mount Kit (463075) is the rack-mount version of the Enterprise 4330 system. It suits installers who want the amplifier alongside network gear in a comms room or equipment rack. Wilson positions the system for enhanced 4G LTE and 5G coverage inside buildings where outdoor signal does not penetrate. It serves every phone and cellular device on all US and Canadian carriers, including smaller regional providers. The rack-mount Enterprise 4330 amplifier (461075) covers Band 12/17 and 13 (700 MHz), Band 5 (850 MHz), Band 4 (1700/2100 MHz) and Band 25 (1900 MHz). It provides 70 dB maximum gain, up to 26 dBm uplink power and 17 dBm downlink power on each of four ports. Channelization lets installers filter specific sub-blocks within a band to deal with interference from a strong outside carrier, or to boost only one carrier. Split mode (multi-tower targeting) supports separate outdoor antennas for different bands. XDR (eXtended Dynamic Range) continuously scans and adjusts so the system does not shut down from strong signal. A color LCD touchscreen and real-time network scanning simplify commissioning. Remote access runs through the WilsonPro Cloud service over Ethernet or the internal, pre-activated LTE modem. The kit includes the amplifier, a 314411 wideband directional outside antenna, four 304412 dome inside antennas, five 100 ft Wilson 400 cables, a 2 ft Wilson 400 jumper and an 859902 50-ohm lightning surge protector. It ships in one box weighing 60.93 lbs, is assembled in the USA, and carries a 3-year warranty from purchase. A manufacturer spec sheet is available.