Provide a 60 ft RF cable path between equipment with an N connection and equipment or an antenna-side component with a 7/16 DIN connection. This assembly combines an N male connector on one end with a 7/16 DIN male connector on the other, eliminating the need to terminate those two connector types in the field. Its LMR-600 cable construction suits installations that call for this cable series and connector arrangement. The VENTEV VENSJ-600-7716-60 is a terminated coaxial assembly rather than a loose cable reel or connector adapter. The fixed 60 ft length supports installations where the radio, surge-protection hardware, distribution equipment, or antenna feed point has already been placed at a known separation. Both ends are male, so mating equipment must provide the corresponding female N and female 7/16 DIN interfaces. This specific assembly is distinguished by three ordering-critical characteristics: LMR-600 cable, an N male to 7/16 DIN male connector pairing, and a 60 ft finished length. Check the connector interfaces at both endpoints before installation, particularly where existing RF hardware may use similar-looking but mechanically different connector families. The assembly is intended to create one continuous coaxial run between compatible RF components.