Connect Ethernet switches, routers, access points, IP cameras, LED signage, and other RJ45-equipped equipment across a short 7 ft copper link. The StarTech CAT6UTP7FTYL supports 10 Gbps Ethernet and up to 100 W Power over Ethernet under IEEE 802.3bt Type 4, allowing network data and high-power PoE service to share one Cat6 cable run. Its yellow jacket helps distinguish the connection from other patching in racks, work areas, and communications closets. Twenty-four AWG stranded pure bare-copper conductors provide the cable’s signal path, while the unshielded twisted-pair construction suits standard copper Ethernet connections. Each end terminates in an RJ45 connector with gold-plated contacts for the equipment interface. Snagless connector protection helps prevent the retaining tab from catching when the cable is routed through cable managers or removed from densely populated patch fields. A CM-rated PVC jacket supports general-installation use, and the cable has a 6.0 mm outside diameter for routing alongside other patch leads. Fluke DSX-8000 Channel testing verifies channel-level cabling performance. Within the available Cat6 cable length and color range, this version provides a 7 ft yellow connection for clearly identified short runs between network equipment and PoE-powered endpoints.