Carry wired Ethernet traffic and Power over Ethernet to devices positioned up to 100 ft from the network switch or injector. StarTech CAT6UTP100FTGR is a gray Cat6 UTP patch cable rated for 10 Gbps Ethernet and up to 100 W of PoE under IEEE 802.3bt Type 4. Its stranded, pure bare-copper 24 AWG conductors provide the copper path required for data and power on the same cable run. Snagless RJ45 connectors protect the retaining latch during routing and moves, while gold-plated contacts provide the mating surface at each end. The 6.0 mm outer diameter supports cable management in desks, wall pathways, racks, and structured cabling areas. A CM-rated PVC jacket makes the cable suitable for general-purpose installations where a riser or plenum jacket is not required. Use this 100 ft length to connect LAN and Wi-Fi access points, IP cameras, LED signage, and other PoE-powered endpoints to a switch, patch panel, or PoE injector. Fluke DSX-8000 Channel testing provides channel-level verification for the cable assembly. Within the available length and color options, this version combines a gray jacket with a 100 ft reach for installations that need a clearly identifiable horizontal or equipment-room patch connection.