Connect a switch, patch panel or wall outlet to a powered network endpoint with a 7 ft Cat6 UTP cable rated for 10 Gbps Ethernet and 100 W PoE under IEEE 802.3bt Type 4. The red jacket provides visible cable identification where ports, devices or network segments need to be distinguished without tracing each run. CAT6UTP7FTRD uses unshielded twisted-pair construction for standard RJ45 Ethernet connections. Its 24 AWG stranded, pure bare-copper conductors support repeated routing at work areas and inside equipment racks. Gold-plated RJ45 contacts help maintain a consistent connection at both ends, while snagless connector boots reduce the chance of the retaining tab catching during installation or removal. The cable has a 6.0 mm outside diameter and a CM-rated PVC jacket for general-purpose installations. Use this cable for short equipment-to-network links where both data and power travel over the same connection, including wireless access points, IP cameras and PoE LED signage. It has been channel tested with a Fluke DSX-8000, providing a documented test basis for its Cat6 channel performance. Within the cable family, this version is defined by its 7 ft length and red color, making it suited to concise, color-organized patching.