Connect PoE-powered network endpoints over a 7 ft copper patch run while retaining support for 10 Gbps Ethernet and up to 100 W of IEEE 802.3bt Type 4 PoE. StarTech CAT6UTP7FTGR is a gray Cat 6 UTP stranded patch cable for links to LAN equipment, Wi-Fi access points, IP cameras, LED signage, and other RJ45 Ethernet devices. Its CM-rated PVC jacket is intended for general installations. The cable uses 24 AWG stranded pure bare-copper conductors for flexible device connections and consistent signaling. Unshielded twisted-pair construction provides a conventional RJ45 copper patching option where shielded cabling is not required. Gold-plated RJ45 contacts and snagless connector boots help protect the latch during routine moves, adds, and changes at a switch, patch panel, wall outlet, or powered endpoint. This specific configuration is distinguished by its 7 ft length and gray jacket within the available length and color range. A 6.0 mm outside diameter provides a defined cable profile for pathway and cable-management planning. The channel has been tested with a Fluke DSX-8000, providing a documented test basis for the installed link category. Select it where a short Cat 6 patch lead must carry both Ethernet traffic and high-power PoE to the connected device.