Carry 10 Gbps Ethernet traffic and up to 100 W PoE for closely spaced RJ45 devices with this 5 ft gray Cat6 UTP patch cable. CAT6UTP5FTGR uses 24 AWG stranded pure bare copper conductors to provide consistent signaling between switches, patch panels, workstations, wireless access points, cameras, and other Ethernet equipment. Its unshielded twisted-pair construction supports standard copper Ethernet patching without the added bulk of shielded cable. Snagless RJ45 connectors protect the retaining tabs when the cable is pulled through crowded racks, desks, and wall-mounted equipment. Gold-plated contacts maintain a reliable contact surface at each termination. The cable has a 6.0 mm outside diameter and a CM-rated PVC jacket intended for general-purpose cabling locations. Its gray finish provides a distinct visual option where cable color is used to identify network connections. This specific 5 ft length fits short equipment-to-switch runs, patch-panel cross-connects, and endpoint links where excess slack is undesirable. It can connect PoE endpoints including LAN and Wi-Fi access points, LED signage, and IP cameras while carrying both network data and power on the same cable. Channel testing with a Fluke DSX-8000 provides documented validation of the cable channel performance.