Connect distant RJ45 endpoints with a 50 ft Cat6 copper patch cable rated for up to 10 Gbps Ethernet and up to 100 W PoE under IEEE 802.3bt Type 4. StarTech CAT6UTP50FTBL uses 24 AWG UTP stranded pure bare-copper conductors to carry data and power between network equipment and powered endpoints. Its blue jacket provides visible cable identification where color coding separates network paths, device groups, or service areas. Snagless RJ45 connectors help protect the locking tabs while routing the cable through cable managers, behind equipment, or around workstation furniture. Gold-plated contacts support a consistent connection at the plug interface. The cable has a 6.0 mm outside diameter and a CM-rated PVC jacket for general-purpose installations. Fluke DSX-8000 channel testing documents channel-level performance validation for the cable. Use this patch cable to connect a switch port to a PoE access point, camera, LED sign, or other powered network endpoint where a short patch lead is insufficient. It also fits copper uplinks between 10 GbE-capable workstations, NAS systems, switches, and patch panels. The specific 50 ft length is suited to rack-to-device and room-spanning runs that need a pre-terminated Cat6 assembly rather than bulk cable and field-installed connectors.