Carry 10 Gbps Ethernet and up to 100 W of IEEE 802.3bt Type 4 Power over Ethernet across a 25 ft copper connection. StarTech CAT6UTP25FRD uses Cat6 UTP construction, 24 AWG stranded pure bare copper conductors, and a 6.0 mm outside diameter. Its red PVC jacket makes this length readily distinguishable where patch-cord color is part of local cable identification. The stated data and PoE ratings allow one run to carry network traffic and endpoint power. Terminate network equipment with snagless RJ45 connectors fitted with gold-plated contacts. The unshielded twisted-pair construction suits Ethernet patching between LAN equipment and powered endpoints, including Wi-Fi access points, IP cameras, and LED signage. CM-rated PVC jacketing supports general-installation cable runs, while Fluke DSX-8000 Channel testing documents channel performance. Select this cable where a 25 ft red patch lead is required rather than a different length or color in the same range. It carries Ethernet data and PoE on one Cat6 connection, helping connect a powered endpoint without a separate local power lead. The stranded conductor construction suits patch-cable routing between network hardware, patching locations, and connected equipment.