Connect adjacent Ethernet devices with a short, clearly identifiable Cat6 patch lead. StarTech CAT6UTP18INRD provides an 18-inch red UTP cable for links where excess slack can obstruct cable management, including patch-panel-to-switch connections and nearby endpoint connections. It supports 10 Gbps Ethernet and up to 100 W Power over Ethernet under IEEE 802.3bt Type 4, allowing one cable to carry network traffic and PoE power to compatible endpoints. The cable uses 24 AWG stranded pure bare-copper conductors for consistent signaling and flexibility in short patching runs. Its unshielded twisted-pair construction has a 6.0 mm outside diameter and a CM-rated PVC jacket for general installations. Gold-plated RJ45 contacts provide the contact surface at each end, while snagless connector boots help protect the retaining latch during installation, removal, and cable moves. Use the red jacket to distinguish a connection by function, network segment, or endpoint type in a crowded rack, cabinet, or wall enclosure. The short length fits links to LAN devices, Wi-Fi access points, LED signage, and IP cameras where a longer patch cord would require loops or ties. Within the available length and color range, this version combines an 18-inch reach with red identification and has been Fluke DSX-8000 Channel tested.