Carry 10 Gbps Ethernet traffic and up to 100 W of IEEE 802.3bt Type 4 PoE over a 14 ft Cat6 connection. The yellow jacket provides a visible color option for identifying links in racks, wall cabinets, desks, and equipment rooms. CAT6UTP14FYL terminates in RJ45 connectors for direct connections between network equipment and Ethernet endpoints. This patch cable uses 24 AWG stranded, pure bare-copper UTP conductors for flexible routing between fixed ports. Its 6.0 mm outside diameter balances cable management with a durable PVC jacket, and the CM-rated construction is intended for general installations. Gold-plated connector contacts support consistent signal contact, while the snagless boot helps prevent the RJ45 latch from catching when the cable is pulled through crowded cable paths. Use the 14 ft length where a short patch lead cannot reach between a switch and a nearby endpoint or patch field. It supports powered network devices such as LAN and Wi-Fi access points, IP cameras, and LED signage without requiring a separate power lead when connected to compatible PoE equipment. Fluke DSX-8000 Channel testing provides channel-level validation for the cable assembly. Within the available yellow Cat6 cable lengths, this version is the 14 ft option for color-coded horizontal or equipment connections.