Connect switches, patch panels, access points, IP cameras and LED signage with a 14 ft Cat6 UTP patch lead that carries 10 Gbps Ethernet and up to 100 W PoE under IEEE 802.3bt Type 4. CAT6UTP14FGN combines a green jacket for visual circuit identification with snagless RJ45 connectors that help protect the retaining tab when patching crowded equipment ports. The cable uses 24 AWG stranded pure bare-copper conductors for flexible patching between active equipment, wall outlets and patch panels. Its unshielded twisted-pair construction terminates in RJ45 connectors with gold-plated contacts for Ethernet connections. A 6.0 mm outside diameter and CM-rated PVC jacket suit general-purpose building installations where a plenum-rated cable is not required. Use this cable where a short, color-coded copper run must carry both network traffic and PoE power to an endpoint. It fits wired connections to LAN equipment, Wi-Fi access points, LED signage and IP cameras without needing a separate power lead where the connected switch or injector supplies compatible PoE. Fluke DSX-8000 channel testing verifies channel performance, while the 14 ft length provides additional routing reach over short rack jumpers.