Carry wired Ethernet and PoE over a short, easily identifiable red patch lead. StarTech CAT6UTP10FRD is a 10 ft Cat6 UTP cable specified for 10 Gbps Ethernet and up to 100 W Power over Ethernet under IEEE 802.3bt Type 4. Its red jacket helps technicians separate endpoint, uplink, camera, wireless, or signage connections from adjacent cable runs in crowded racks, desks, and equipment cabinets. The cable uses 24 AWG stranded pure bare copper conductors for flexible patching between RJ45-equipped devices. Snagless RJ45 connector boots reduce the chance of a release tab catching when the cable is routed through cable managers or removed from a populated patch panel. Gold-plated contacts support consistent connector contact, while the 6.0 mm outside diameter provides a defined cable profile for pathway and bundle planning. Use this Cat6 patch cable to connect LAN equipment, Wi-Fi access points, LED signage, IP cameras, and other PoE endpoints to compatible Ethernet switch ports or structured cabling outlets. The CM-rated PVC jacket is suitable for general-purpose indoor installations. Fluke DSX-8000 channel testing provides a documented channel-test capability that distinguishes this cable from untested patch leads intended only for basic connectivity.