Move 10 Gbps Ethernet traffic across a 10 ft equipment-area connection while carrying up to 100 W of IEEE 802.3bt Type 4 PoE. This gray Cat6 UTP patch cable connects network ports to powered endpoints such as LAN equipment, Wi-Fi access points, LED signage, and IP cameras. Gold-plated RJ45 contacts support consistent connector contact, while snagless connector boots help prevent the latch from catching during cable routing and service work. 24 AWG stranded pure bare copper conductors provide the cable’s signal path, and the 6.0 mm outside diameter supports routing where a full-size patch lead is required. Its CM-rated PVC jacket is intended for general installations. The cable has been channel tested with a Fluke DSX-8000, giving installers a documented test reference for the completed channel rather than relying only on cable-category labeling. Within a range offered in multiple lengths and colors, this selection specifies a 10 ft gray configuration for visually organized patching and short endpoint connections. StarTech CAT6UTP10FGR combines Cat6 UTP construction with PoE support for links that need both Ethernet data and endpoint power on the same copper run. It fits patching tasks where connector snag protection, stranded conductors, and a gray identification color are required.