| Gpio | 8 GPIO |
| Memory | 1MB Flash and 128 KB SRAM |
| Series | XPico Wi-Fi |
| Storage | 1MB SPI Flash storage |
| Security | 256-bit AES Encryption* |
| Processor | ARM Cortex M3 class processor with on-chip Flash and SRAM |
| Web Server | Landing Page |
| Module Type | IEEE 802.11 b/g/n Device Server Module |
| Quickconnect | Dynamic Profiles facilitate easy and rapid connections to access points |
| Serial Ports | Two Serial CMOS Ports (3.3V, 5V tolerant) |
| Storage Temp | -40° to +85° C |
| Configuration | Extended Temp, w/ on-module Antenna SMT, Sample, RoHS |
| Input Voltage | 3.3VDC |
| Certifications | FCC Class B, UL and EN EMC, Japan |
| Host Interface | Dual Serial Port, SPI, USB 2.0* (device) |
| Operating Temp | -40° to +85° C |
| Serial Data Rate | 300 to 921.6 Kbps |
| Antenna Connector | U.FL connector for external antenna |
| Network Protocols | TCP/IP, UDP/IP, DHCP, ARP, ICMP, Auto-IP, DNS, SNMPv1 |
| Relative Humidity | 0% to 90% non-condensing |
| Physical Interface | 40-pin Board-to-Board SMT Connector |
| Serial Application | Lantronix tunneling application |
| Wireless Standards | IEEE 802.11 d/h/i |
| Ieee 80211i Support | WPA-Personal, WPA2-Personal |
| Serial Flow Control | XON/XOFF, RTS/CTS (SPort 1 only) |
| Thermal Requirement | For operation over +70° C a thermal pad is required |
| Management And Control | CLI (Serial Monitor Port); XML import and Export (XCR); Field upgradable firmware (OTA) |
| Wireless Lan Interface | IEEE 802.11 b/g and IEEE 802.11n (single stream) WLAN interface (2.4 GHz only) |
| Networking Capabilities | Soft Access Point with DHCP Server |
| Standby Power Consumption | Low power consumption of approximately 6μA standby |
Business account holders on Enterprise IoT Gateways typically save 6% vs. retail pricing. Create a free account to see your price.
It supports IEEE 802.11 b/g and IEEE 802.11n single stream WLAN on 2.4 GHz only. The Lantronix specs also list IEEE 802.11 d/h/i.
The host interface is Dual Serial Port, SPI, USB 2.0* (device), with 8 GPIO. The serial interface uses Two Serial CMOS Ports with 3.3V and 5V tolerant signaling.
The operating temperature is -40° to +85° C. For operation over +70° C a thermal pad is required.
Yes. The Lantronix part row describes XPCW1003100S as xPico Wi-Fi SMT w/ Antenna (Sample).
Save 6%Lantronix · ED2100002-01
Lantronix · ED41000P2-01
Lantronix · ED41000P0-01
Save 24%Lantronix · ACC-500-164-R
Save 24%Lantronix · ACC-930-076-R
Call for Price
