Lantronix XPCW1002100K

Name: Lantronix xPico W1002 Wi-Fi SMT Evaluation Kit
Brand: Lantronix
SKU: XPCW1002100K

Lantronix xPico W1002 Wi-Fi SMT Evaluation Kit XPCW1002100K

Lantronix xPico W1002 Wi-Fi SMT Evaluation Kit includes the xPico Wi-Fi W1002 Wi-Fi Module SMT on a carrier board, with U.FL and an antenna sample. It supports IEEE 802.11 b/g/n and uses the xPico Wi-Fi family’s compact Wi-Fi module platform. Designed for M2M and IoT applications, xPico Wi-Fi provides full IP and WLAN stacks, simultaneous Soft AP and client mode, and zero host load. It enables wireless LAN connectivity for designs with serial, SPI or USB interfaces. The module provides WPA-Personal, WPA2-Personal, 256-bit AES Encryption*, CLI through the Serial Monitor Port, XML import and Export (XCR), and field upgradable firmware (OTA).

Ideal For

Evaluating xPico Wi-Fi W1002 SMT integration on a carrier board
Adding Wi-Fi connectivity to M2M and IoT products with serial, SPI or USB interfaces
Configuring headless products through simultaneous Soft AP and client mode
Testing WPA-Personal, WPA2-Personal and 256-bit AES Encryption* support

Specifications

Gpio	8 GPIO
Memory	1MB Flash and 128 KB SRAM
Firmware	Field upgradable firmware (OTA)
Security	256-bit AES Encryption*
Processor	ARM Cortex M3 class processor with on-chip Flash and SRAM
Management	CLI (Serial Monitor Port)
Web Server	Landing Page
Flow Control	XON/XOFF, RTS/CTS (SPort 1 only)
Quickconnect	Dynamic Profiles facilitate easy and rapid connections to access points
Storage Temp	-40° to +85° C
Configuration	XML import and Export (XCR)
Input Voltage	3.3VDC
Product Group	XPico Wi-Fi SMT
Standby Power	Low power consumption of approximately 6μA standby
Usb Interface	USB 2.0* (device)
Host Interface	Dual Serial Port; SPI
Operating Temp	-40° to +85° C
Included Module	XPico Wi-Fi W1002 Wi-Fi Module SMT on Carrier Board
Included Antenna	Antenna sample
Serial Data Rate	300 to 921.6 Kbps
Serial Interface	Two Serial CMOS Ports (3.3V, 5V tolerant)
Antenna Connector	U.FL connector for external antenna
Network Protocols	TCP/IP, UDP/IP, DHCP, ARP, ICMP, DHCP, Auto-IP, DNS, SNMPv1
Spi Flash Storage	1MB SPI Flash storage
Wireless Standard	IEEE 802.11 d/h/i
Physical Interface	40-pin Board-to-Board SMT Connector
Ieee 80211i Support	WPA-Personal, WPA2-Personal
Thermal Requirement	For operation over +70° C a thermal pad is required
Networking Capability	Soft Access Point with DHCP Server
Wireless Lan Interface	IEEE 802.11 b/g and IEEE 802.11n (single stream) WLAN interface (2.4 GHz only)

Purchasing this for your business?

Business account holders on Enterprise IoT Gateways typically save 6% vs. retail pricing. Create a free account to see your price.

Wholesale pricing below retail

Net-30 terms for qualified businesses

Volume discount tiers

Dedicated account representative

Saved payment methods & PO support

Priority order processing

Create Free Business Account

Frequently Asked Questions

What is included with XPCW1002100K?▾

It includes the xPico Wi-Fi W1002 Wi-Fi Module SMT on a carrier board, with U.FL and an antenna sample.

Which Wi-Fi standards does it support?▾

The wireless LAN interface supports IEEE 802.11 b/g and IEEE 802.11n single stream on 2.4 GHz only, plus IEEE 802.11 d/h/i.

What host interfaces are available?▾

Host interfaces include Dual Serial Port, SPI, USB 2.0* device, and 8 GPIO.

What power input does the module use?▾

The input voltage is 3.3VDC. The listed standby power consumption is approximately 6μA.