The PJU1086T is a 10 x 8 x 6 Type 4X non-metallic junction box from the PJU Series with a solid cover and mounting feet. It is built for instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes and terminal wiring enclosures, and suits sites where equipment may be hosed down, is very wet, runs hot or sits in a highly corrosive environment.

Construction is a compression molded fiberglass reinforced polyester box with a matching solid fiberglass reinforced polyester cover, finished in gray and protected by enhanced UV inhibitors against outdoor weathering. The box and cover are easily punched, cut or drilled for glands and devices. A molded hinge with a 316 stainless steel hinge pin carries the door, which closes with 316 stainless steel lockable twist latch featuring a padlocking provision and seals on a captive oil resistant FIP polyurethane gasket. Wall thickness is .14 in (3.68 mm).

The enclosure measures 10.05 in (255 mm) high, 8.27 in (210 mm) wide and 6.13 in (156 mm) deep, with a shipping weight of 6 lbs (2.72 kg). Threaded brass inserts accept the optional 14R0907 inner panel, which measures 8.75 in (222 mm) by 6.88 in (175 mm); optional panels are offered in white powder coated steel, unfinished aluminum or fiberglass. It mounts on four polycarbonate feet: (4X) polycarbonate feet, each on a #10-32 brass insert with 316 stainless steel feet screws. Mounting hardware is included.

The PJU Series is listed to UL 508A Type 1, 2, 3, 4, 4X, 12 and 13 and cUL Type 1, 2, 3, 4, 4X, 12 and 13 per CSA 22.2 No. 94, and complies with NEMA Type 1, 2, 3, 4, 4X, 12 and 13 and IEC 60529 IP66. It is rated for operating temperatures from -40°C to 130°C (-40°F to 266°F) with an impact index of 6.78 J (5 ft/lb). The PJU1086T is RoHS and REACH compliant.