The PJU1084H is a 10 x 8 x 4 in Type 4X polyester junction box with a solid cover on a continuous hinge and four polycarbonate feet. The hinge keeps the cover attached while you wire or service the box. It is designed for use as an instrument enclosure, an electric, hydraulic or pneumatic control housing, an electrical junction box or a terminal wiring enclosure, providing insulation and protection where equipment may be hosed down, very wet, hot or exposed to highly corrosive conditions.
Box and cover are compression molded fiberglass reinforced polyester with a gray finish and enhanced UV inhibitors for outdoor weathering. Entries can be added easily, as the material is readily punched, cut or drilled. The cover turns on a molded hinge with a stainless steel hinge pin and is closed by two stainless steel captive cover screws in #10-32 brass inserts with retaining O-rings, sealing on a captive, oil resistant closed cell neoprene gasket.
The box measures 10.05 in H x 8.27 in W x 4.13 in D (255 x 210 x 105 mm) and ships at 5 lbs (2.27 kg). Four #10-32 brass inserts with plated carbon steel screws accept the optional 14R0907 inner panel, 8.75 x 6.88 in (222 x 175 mm), or a terminal kit assembly.
The feet attach with stainless steel screws in brass inserts, and mounting hardware is included. PJU1084H is UL 508A and cUL (CSA 22.2 No. 94) Type 1, 2, 3, 4, 4X, 12 and 13, complies with NEMA Type 1, 2, 3, 4, 4X, 12 and 13, and is rated IEC 60529 IP66. It operates from -40°C to 130°C (-40°F to 266°F), has an impact index of 6.78 J (5 ft/lb), and is REACH and RoHS compliant.
| Series | PJU Series – Continuous Hinge Door with Screws |
| Cover Type | Solid fiberglass polyester cover |
| Cover Style | Continuous hinge door fastened with captive screws |
| Description | N4X Solid Door Hinge Cover w/feet - 10 x 8 x 4 - Fiberglass |
| Product Type | Type 4X polyester junction box (NEMA 4X, non-metallic) |
| Mounting Style | Polycarbonate feet |
| Short Description | NON MET HNG SC CVR FEET |
| Enclosure Depth | 4.13 in (105 mm) |
| Enclosure Width | 8.27 in (210 mm) |
| Enclosure Height | 10.05 in (255 mm) |
| Size (H X W X D) | 10.05 in x 8.27 in x 4.13 in (255 mm x 210 mm x 105 mm) |
| Nominal Size (H X W X D) | 10 x 8 x 4 in |
| Optional Inner Panel Width | 6.88 in (175 mm) |
| Optional Inner Panel Height | 8.75 in (222 mm) |
| UPC | 623980021140 |
| UNSPSC | 39121324 |
| Part Number | PJU1084H |
| Shipping Weight | 5 lbs (2.27 kg) |
| Same-Size Variants | Solid cover, flange: PJU1084HF; Clear cover, flange: PJU1084CCHF; Clear cover, feet: PJU1084CCH |
| Available Accessories | Additional inner panels, terminal kit assemblies, pole mounting kit, PJ/PJU/PCJ replacement hardware kits, PJU/PCJ replacement polycarbonate flange and feet, climate control |
| Optional Back Panel Thickness | Aluminum 0.100 in (2.54 mm); white steel & galvannealed 0.075 in (1.91 mm); fiberglass 0.125 in (3.18 mm) |
| Optional Inner Panel Part No. | 14R0907 |
| Optional Inner Panel Materials | White powder coated steel, unfinished aluminum, or fiberglass |
| Hinge | Molded continuous hinge, Stainless steel hinge pin |
| Finish | Gray (fiberglass polyester) |
| Gasket | Closed cell neoprene gasket; captive, oil resistant |
| Modification | Easily punched, cut or drilled |
| UV Protection | Enhanced UV inhibitors protect against outdoor weathering |
| Cover Material | Compression molded fiberglass reinforced polyester |
| Cover Fastening | (2) #10-32 brass inserts with stainless steel captive cover screws and retaining O-ring |
| Mounting Brackets | (4) polycarbonate feet |
| Mounting Hardware | (4) #10-32 brass inserts with stainless steel feet screws (included) |
| Enclosure Material | Compression molded fiberglass reinforced polyester |
| Inner Panel Mounting | (4) #10-32 brass inserts with plated carbon steel screws |
| Impact Index | 6.78 J (5 ft/lb) |
| Ingress Protection | IEC 60529 IP66 |
| Operating Temperature | 130°C to -40°C (266°F to -40°F) |
| Enclosure Type Ratings | NEMA Type 1, 2, 3, 4, 4X, 12 and 13 |
| UL | UL 508A Type 1, 2, 3, 4, 4X, 12 and 13 |
| IEC | IEC 60529, IP66 |
| CUL | cUL Type 1, 2, 3, 4, 4X, 12 and 13 per CSA 22.2 No. 94 |
| NEMA | Complies with NEMA Type 1, 2, 3, 4, 4X, 12 and 13 |
| RoHS Compliant | Yes |
| REACH Compliant | Yes |
Business account holders get access to exclusive pricing, volume discounts, and dedicated support. Create a free account to get started.
10.05 in H x 8.27 in W x 4.13 in D (255 x 210 x 105 mm).
With two stainless steel captive screws in #10-32 brass inserts with retaining O-rings; the cover pivots on a molded hinge with a stainless steel pin.
5 lbs (2.27 kg).
14R0907, 8.75 x 6.88 in (222 x 175 mm).
UL 508A and cUL Type 1, 2, 3, 4, 4X, 12 and 13, and IEC 60529 IP66.
Hammond Manufacturing · 1413BGS
Hammond Manufacturing · 1413BKLGS
Hammond Manufacturing · 1413BKS
Hammond Manufacturing · 1413BNS
Hammond Manufacturing · 1413CGRALS
