The PJU1084CC is a 10 x 8 x 4 in nominal Type 4X polyester junction box from the PJU Series with a clear polycarbonate lift-off cover held by captive stainless steel screws. Typical uses listed for the series are instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes and terminal wiring enclosures, particularly where equipment is hosed down, very wet, hot or exposed to corrosive environments.
The box is compression molded fiberglass reinforced polyester in a gray finish and the clear cover is polycarbonate. The fiberglass polyester is easily punched, cut or drilled, carries enhanced UV inhibitors for outdoor weathering, and rates an impact index of 6.78 J (5 ft/lb). It seals with a captive, oil resistant closed cell neoprene gasket; the cover is fastened by captive screws threaded into four #10-32 brass inserts, which carry retaining O-rings.
Enclosure dimensions are 10.05 in H x 8.27 in W x 4.13 in D (255 mm x 210 mm x 105 mm). With its four polycarbonate mounting feet fitted, the drawing shows an overall height of 11.47 in. Threaded brass inserts accept the optional 14R0907 inner panel, which measures 8.75 in x 6.88 in and is offered in white powder coated steel, unfinished aluminum or fiberglass.
The PJU1084CC mounts through (4) 0.31 in (7.95 mm) holes on its polycarbonate feet, spaced 10.75 in x 5.21 in per the drawing. Mounting hardware is included. The series is listed to UL 508A Type 1, 2, 3, 4, 4X, 12 and 13 and cUL Type 1, 2, 3, 4, 4X, 12 and 13 per CSA 22.2 No. 94, and complies with NEMA Type 1, 2, 3, 4, 4X, 12 and 13 and IEC 60529 IP66. It operates from -40°C to 130°C (-40°F to 266°F) and is RoHS and REACH compliant.
| Mounting Feet | (4) polycarbonate feet |
| Mounting Hardware | Included |
| Flange/Feet Hardware | (4) #10-32 brass inserts with stainless steel flange and feet screws |
| Mounting Holes (Drawing) | (4) 0.31 in (7.95 mm) |
| Multi-Directional Mounting | Polycarbonate flange or foot mount brackets |
| Mounting Hole Centers, Vertical (Drawing) | 10.75 in (273.04 mm) |
| Mounting Hole Centers, Horizontal (Drawing) | 5.21 in (132.26 mm) |
| Series | PJU Series Type 4X Polyester Junction Box (Solid and Clear Cover) |
| Cover Type | Clear cover |
| Cover Style | Lift-off cover with screws |
| Description | N4X Clear Door Screw Cover w/feet - 10 x 8 x 4 - Fiberglass |
| Mounting Style | Polycarbonate feet |
| Short Description | NON MET LIFT OFF CLR CVR FEET |
| Nominal Size | 10 x 8 x 4 in |
| Size H X W X D | 10.05 in x 8.27 in x 4.13 in (255 mm x 210 mm x 105 mm) |
| Enclosure Depth | 4.13 in (105 mm) |
| Enclosure Width | 8.27 in (210 mm) |
| Enclosure Height | 10.05 in (255 mm) |
| Overall Height Incl. Feet (Drawing) | 11.47 in (291.28 mm) |
| UPC | 623980021126 |
| UNSPSC | 39121324 |
| Part Number | PJU1084CC |
| Drawing Issue Date | 07/01/2014 |
| Inner Panel Mounting | (4) #10-32 brass inserts and plated carbon steel screws |
| Optional Inner Panel Width | 6.88 in (175 mm) |
| Optional Inner Panel Height | 8.75 in (222 mm) |
| Optional Inner Panel Finishes | White powder coated steel, unfinished aluminum, or fiberglass |
| Optional Inner Panel Part No. | 14R0907 |
| Optional Panel Thickness - Aluminum | 0.100 in (2.54 mm) |
| Optional Panel Thickness - Fiberglass | 0.125 in (3.18 mm) |
| Optional Panel Thickness - White Steel & Galvannealed | 0.075 in (1.91 mm) |
| Shipping Weight | 6 lbs (2.72 kg) |
| Finish | Gray fiberglass polyester |
| Gasket | Captive oil resistant closed cell neoprene gasket |
| Box Material | Compression molded fiberglass reinforced polyester |
| Machinability | Easily punched, cut, or drilled |
| UV Protection | Enhanced UV inhibitors protect against outdoor weathering |
| Cover Material | Compression molded fiberglass reinforced polyester |
| Cover Fastening | (4) #10-32 brass inserts with stainless steel captive cover screws with retaining O-rings |
| Clear Cover Material | Polycarbonate |
| Impact Index | 6.78 J (5 ft/lb) |
| Ingress Protection | IP66 (IEC 60529) |
| Operating Temperature | -40°C to 130°C (-40°F to 266°F) |
| UL | UL 508A Type 1, 2, 3, 4, 4X, 12 and 13 |
| IEC | Complies with IEC 60529, IP66 |
| CUL | cUL Type 1, 2, 3, 4, 4X, 12 and 13 per CSA 22.2 No. 94 |
| NEMA | Complies with NEMA Type 1, 2, 3, 4, 4X, 12 and 13 |
| RoHS Compliant | Yes |
| REACH Compliant | Yes |
Business account holders get access to exclusive pricing, volume discounts, and dedicated support. Create a free account to get started.
The enclosure measures 10.05 in (255 mm) high, 8.27 in (210 mm) wide and 4.13 in (105 mm) deep (nominal 10 x 8 x 4 in). Including the feet, the drawing shows an overall height of 11.47 in (291.28 mm).
Yes. It carries UL 508A Type 1, 2, 3, 4, 4X, 12 and 13 and cUL ratings, complies with NEMA Type 1, 2, 3, 4, 4X, 12 and 13, and is rated IP66 (IEC 60529). The series is described for equipment that may be hosed down or be very wet, and enhanced UV inhibitors protect against outdoor weathering.
The cover lifts off and is fastened with captive stainless steel screws that thread into brass inserts, with retaining O-rings.
The optional inner panel is part number 14R0907, measuring 8.75 in (222 mm) x 6.88 in (175 mm). It mounts on #10-32 brass inserts with plated carbon steel screws, and panels are offered in white powder coated steel, unfinished aluminum or fiberglass.
It comes with four polycarbonate feet with (4) 0.31 in (7.95 mm) mounting holes. Mounting hardware is included. The same size is also listed as PJU1084F, PJU1084 and PJU1084CCF with other cover and mounting combinations.
The series lists operating temperatures between 130°C and -40°C (266°F to -40°F), with an impact index of 6.78 J (5 ft/lb).
Hammond Manufacturing · 1413BGS
Hammond Manufacturing · 1413BKLGS
Hammond Manufacturing · 1413BKS
Hammond Manufacturing · 1413BNS
Hammond Manufacturing · 1413CGRALS
