The PJ864RL is a compact Type 4X junction box molded from fiberglass reinforced polyester, fitted with a solid raised lid on a stainless steel hinge. At 8.00 x 6.12 x 4.13 in (203 x 155 x 105 mm) it suits electricians and OEM builders who need a small instrument enclosure, terminal wiring box or control housing that will be hosed down, run wet or face corrosive conditions.
Both the box and cover are compression molded fiberglass reinforced polyester with a gray finish and enhanced UV inhibitors for outdoor weathering. The material is easily punched, cut or drilled for conduit and device openings. A 316 stainless steel hinge carries the cover, and a single stainless steel lockable snap latch located on center closes it against an FIP polyurethane gasket. The drawing shows a .14 in (3.55 mm) wall thickness.
Four #10-32 brass inserts with plated carbon steel screws accept the optional 14R0705 inner panel (6.75 x 4.88 in). Four 316 stainless steel feet attach to the rear through #10-32 brass inserts for wall mounting, with .34 in (8.74 mm) foot holes.
The PJ series is listed to UL 508A Type 1, 2, 3, 4, 4X, 12 and 13, cUL per CSA 22.2 No. 94, and complies with NEMA Type 1, 2, 3, 4, 4X, 12 and 13 and IEC 60529 IP66. The PJ864RL is RoHS and REACH compliant and ships at 4 lbs (1.81 kg).
| Series | PJ Series |
| Cover Type | Solid cover |
| Door Style | Continuous Hinge Door with Snap Latches |
| Product Type | Type 4X Polyester Junction Box w/ Raised Lid |
| Long Description | N4X Wallmount Encl - 8.00 x 6.12 x 4.13 - Fiberglass |
| Short Description | 8X6X4 NON-MET RAISED LID |
| Solid Cover Part No. | PJ864RL |
| Window Cover Part No. | PJ864RLW |
| Wall Thickness | .14 in [3.55 mm] |
| Enclosure Depth | 4.13 in (105 mm) |
| Enclosure Width | 6.12 in (155 mm) |
| Enclosure Height | 8.00 in (203 mm) |
| Size H X W X D (Part Page) | 8 in x 6.12 in x 4.13 in (203 mm x 155 mm x 105 mm) |
| UPC | 623980370354 |
| UNSPSC | 39121324 |
| Part Number | PJ864RL |
| Drawing Issue Date | 06/17/2014 |
| Shipping Weight | 4 lbs (1.81 kg) |
| Hinge | 316 stainless steel hinge |
| Finish | Gray |
| Gasket | FIP polyurethane gasket |
| Latches | Stainless steel lockable snap latch, located on center |
| Hinge Type | Continuous stainless steel hinge supports the door |
| Latch Type | Stainless steel draw type "snap latch" door fasteners with provision for padlocking |
| Gasket Type | Captive oil resistant gasket provides a positive seal |
| Box Material | Compression molded fiberglass reinforced polyester |
| Impact Index | 6.78 J (5 ft/lb) |
| Machinability | Easily punched, cut, or drilled |
| UV Protection | Enhanced UV inhibitors protect against outdoor weathering |
| Cover Material | Compression molded fiberglass reinforced polyester |
| Mounting Feet | (4X) 316 stainless steel feet |
| Mounting Hardware | Stainless steel mounting brackets and hardware provided for mounting to the rear of the enclosure; mounting hardware included |
| Optional Inner Panel Depth | 4.88 in (124 mm) |
| Mounting Foot Hole Diameter | (4X) .34 in [8.74 mm] |
| Optional Inner Panel Height | 6.75 in (171 mm) |
| Inner Panel Mounting Inserts | (4X) each #10-32 brass inserts and plated carbon steel screws |
| Optional Inner Panel Finishes | White powder coated finished steel, unfinished aluminum, or fiberglass |
| Optional Inner Panel Part No. | 14R0705 |
| Mounting Feet Inserts & Screws | (4X) each #10-32 brass inserts and 316 stainless steel feet screws |
| Optional Back Panel Thickness - Steel | 0.075 in [1.91 mm] white steel & galvannealed |
| Optional Back Panel Thickness - Aluminum | 0.100 in [2.54 mm] |
| Optional Back Panel Thickness - Fiberglass | 0.125 in [3.18 mm] fiberglass |
| Ingress Protection | IEC 60529, IP66 |
| Operating Temperature | 130°C to -40°C (266°F to -40°F) |
| UL | UL 508A Type 1, 2, 3, 4, 4X, 12 and 13 |
| IEC | Complies with IEC 60529, IP66 |
| CUL | cUL Type 1, 2, 3, 4, 4X, 12 and 13 per CSA 22.2 No. 94 |
| NEMA | Complies with NEMA Type 1, 2, 3, 4, 4X, 12, & 13 |
| RoHS Compliant | Yes |
| REACH Compliant | Yes |
Business account holders get access to exclusive pricing, volume discounts, and dedicated support. Create a free account to get started.
The enclosure measures 8.00 in H x 6.12 in W x 4.13 in D (203 x 155 x 105 mm).
No. The PJ864RL has a solid cover. The same size with a polycarbonate viewing window is PJ864RLW.
The optional inner panel is part number 14R0705, 6.75 in by 4.88 in, mounted on four #10-32 brass inserts. Panels are offered in white powder coated steel, unfinished aluminum or fiberglass.
Yes. The stainless steel snap latch door fastener includes a provision for padlocking.
UL 508A Type 1, 2, 3, 4, 4X, 12 and 13, cUL Type 1, 2, 3, 4, 4X, 12 and 13 per CSA 22.2 No. 94, and compliance with NEMA Type 1, 2, 3, 4, 4X, 12 and 13 and IEC 60529 IP66.
Hammond Manufacturing · 1413BGS
Hammond Manufacturing · 1413BKLGS
Hammond Manufacturing · 1413BKS
Hammond Manufacturing · 1413BNS
Hammond Manufacturing · 1413CGRALS
