The PJ864L is an 8.00 x 6.12 x 4.13 in (203 x 155 x 105 mm) Type 4X polyester junction box with a continuous hinge door and snap latch; the part page lists a nominal 8 x 6 x 4 in (203 x 152 x 102 mm). It is suited to instrument enclosures, electric, hydraulic or pneumatic control housings, junction boxes and terminal wiring enclosures in hose-down, very wet, high-temperature or highly corrosive locations.
For this size the drawing specifies 316 stainless steel hardware: a 316 stainless steel hinge, a 316 stainless steel lockable snap latch located on center, and 316 stainless mounting feet and feet screws. The series describes the draw type snap latch as including a provision for padlocking. Sealing is by a formed-in-place (FIP) polyurethane gasket, and the wall thickness is 0.14 in (3.55 mm).
Box and cover are compression molded fiberglass reinforced polyester in gray, with enhanced UV inhibitors, and are easily punched, cut or drilled. Four 10-32 threaded brass inserts with plated carbon steel screws take the optional 14R0705 inner panel, 6.75 x 4.88 in (171 x 124 mm), or a terminal kit; back panels are shown in 0.100 in aluminum, 0.075 in white steel and galvannealed, and 0.125 in fiberglass.
The four feet give 9.82 in (249.53 mm) overall with 0.34 in (8.74 mm) holes. The PJ864L is UL 508A and cUL (CSA 22.2 No. 94) Type 1, 2, 3, 4, 4X, 12 and 13, complies with IEC 60529 IP66, operates from 130°C to -40°C (266°F to -40°F) and has a 6.78 J (5 ft/lb) impact index. It ships at 4 lbs (1.81 kg) and is REACH and RoHS compliant.
| Feet Hardware | (4) #10-32 brass inserts with 316 stainless steel feet screws |
| Mounting Feet | (4) 316 stainless steel feet |
| Product Type | Type 4X polyester junction box, continuous hinge door with snap latch |
| Long Description | N4X Wallmount Encl - 8.00 x 6.12 x 4.13 - Fiberglass |
| Short Description | NON METALLIC SNAPLATCH |
| Twist Latch Equivalent | PJ864T |
| Wall Thickness | 0.14 in (3.55 mm) |
| Nominal Size (H X W X D) | 8 in x 6 in x 4 in (203 mm x 152 mm x 102 mm) |
| Enclosure Size (H X W X D) | 8.00 in (203 mm) x 6.12 in (155 mm) x 4.13 in (105 mm) |
| Mounting Foot Hole Centres | 9.19 in (233.53 mm) x 5.01 in (127.36 mm) |
| Overall Length Over Mounting Feet | 9.82 in (249.53 mm) |
| Compatible Accessory Types | Additional inner panels, terminal kit assemblies, pole mounting kit, PJ/PJU/PCJ replacement hardware kits, window kits, PJ stainless replacement mounting feet, climate control, general accessories |
| UPC | 623980951089 |
| UNSPSC | 39121324 |
| Panel Mounting | (4) #10-32 brass inserts with plated carbon steel screws |
| Inner Panel Part No. | 14R0705 |
| Inner Panel Size (H X W) | 6.75 in (171 mm) x 4.88 in (124 mm) |
| Optional Back Panel Thickness | 0.100 in (2.54 mm) aluminum; 0.075 in (1.91 mm) white steel & galvannealed; 0.125 in (3.18 mm) fiberglass |
| Shipping Weight | 4 lbs (1.81 kg) |
| Finish | Gray fiberglass polyester |
| Box Material | Compression molded fiberglass reinforced polyester |
| Modification | Enclosure and matching cover are easily punched, cut, or drilled |
| Cover Material | Compression molded fiberglass reinforced polyester |
| Hinge (Series) | Continuous stainless steel hinge |
| Gasket (Series) | Captive oil resistant gasket provides a positive seal |
| Hinge (Drawing) | 316 stainless steel |
| Latch (Drawing) | 316 stainless steel lockable snap latch located on center |
| Gasket (Drawing) | FIP (formed-in-place) polyurethane |
| Door Fasteners (Series) | Stainless steel draw type "snap latch" door fasteners with padlocking provision |
| Mounting Feet Attachment | Threaded brass inserts on the rear of the enclosure; stainless steel mounting brackets and hardware provided |
| Optional Inner Panel Materials | White powder coated finished steel, unfinished aluminum, or fiberglass |
| Window Material (Where Fitted) | Polycarbonate |
| Inner Panel / Terminal Kit Mounting | 10-32 threaded brass inserts provided; mounting hardware included |
| Impact Index | 6.78 J (5 ft/lb) |
| UV Protection | Enhanced UV inhibitors protect against outdoor weathering |
| Operating Temperature | 130°C to -40°C (266°F to -40°F) |
| Application Environment | Suited where equipment may be hosed down or be very wet; high temperatures or highly corrosive environments |
| UL | UL 508A Type 1, 2, 3, 4, 4X, 12 & 13 |
| CUL | cUL Type 1, 2, 3, 4, 4X, 12 & 13 per CSA 22.2 No. 94 |
| NEMA | Complies with NEMA Type 1, 2, 3, 4, 4X, 12 & 13 |
| RoHS Compliant | Yes |
| REACH Compliant | Yes |
| IEC 60529 Ingress Protection | IP66 |
Business account holders get access to exclusive pricing, volume discounts, and dedicated support. Create a free account to get started.
The ordering table lists 8.00 x 6.12 x 4.13 in (203 x 155 x 105 mm); the part page gives a nominal 8 x 6 x 4 in.
The drawing specifies 316 stainless steel for the hinge, snap latch, mounting feet and feet screws.
The optional 14R0705 inner panel, 6.75 x 4.88 in (171 x 124 mm).
Yes. PJ864T is the same enclosure with a twist latch.
Yes. The series states the door fasteners include a provision for padlocking.
Hammond Manufacturing · 1413BGS
Hammond Manufacturing · 1413BKLGS
Hammond Manufacturing · 1413BKS
Hammond Manufacturing · 1413BNS
Hammond Manufacturing · 1413CGRALS
