The PJ24208RT is a 24.00 x 20.00 x 8.13 in (610 x 508 x 207 mm) Type 4X wallmount enclosure with a raised solid lid, one of the large sizes in the PJ twist-latch series. It is built for instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes and terminal wiring enclosures in places that are hosed down, very wet, hot or highly corrosive.
Box and cover are compression molded fiberglass reinforced polyester with a gray finish and enhanced UV inhibitors, and can be easily punched, cut or drilled. At this size the drawing shows four 316 stainless steel lockable twist latches and two 316 stainless steel hinges, sealed by a FIP polyurethane gasket, with a 0.14 in (3.58 mm) wall. The draw-type latches include a provision for padlocking.
The optional 18P2117 inner panel measures 21.00 x 17.00 in (533 x 432 mm) and mounts on six 3/8"-16 brass inserts with plated carbon steel screws. Back panels on the drawing are 0.100 in aluminum, 0.105 in white steel, or 0.250 in fiberglass. Four 316 stainless steel feet attach to 3/8"-16 brass inserts on the rear with 316 stainless screws; this size uses the larger mounting foot, and mounting hardware is included.
The PJ24208RT is UL 508A and cUL (CSA 22.2 No. 94) listed for Type 1, 2, 3, 4, 4X, 12 and 13, complies with NEMA Type 1, 2, 3, 4, 4X, 12 and 13 and IEC 60529 IP66, and is REACH and RoHS compliant. It operates from 130°C to -40°C (266°F to -40°F), has a 6.78J (5 ft/lb) impact index and ships at 24 lbs (10.89 kg).
| Mounting Feet | (4X) 316 stainless steel feet |
| Mounting Style | Wallmount |
| Included Hardware | Mounting hardware is included |
| Mounting Foot Size | Uses larger mounting foot |
| Mounting Feet Hardware | (4X) each 3/8"-16 brass inserts and 316 stainless steel feet screws; threaded brass inserts on the rear of the enclosure |
| Mounting Brackets & Hardware | Stainless steel mounting brackets and hardware provided for mounting to the rear of the enclosure |
| Series | PJ Series – Continuous Hinge Door with Twist Latches |
| Cover Style | Solid cover |
| Product Type | Type 4X Polyester Junction Box w/ Raised Lid (Solid and Window) |
| Long Description | N4X Wallmount Encl - 24 x 20 x 8.13 - Fiberglass |
| Short Description | RAISED LID TWIST LATCH |
| Solid Cover Part No. | PJ24208RT |
| Window Cover Part No. | PJ24208RTW |
| Wall Thickness (Drawing) | 0.14 in (3.58 mm) |
| Size H X W X D (Part Page) | 24 in x 20 in x 8.13 in (610 mm x 508 mm x 207 mm) |
| Enclosure Depth (Ordering Table) | 8.13 in (207 mm) |
| Enclosure Width (Ordering Table) | 20.00 in (508 mm) |
| Enclosure Height (Ordering Table) | 24.00 in (610 mm) |
| UPC | 623980703442 |
| UNSPSC | 39121324 |
| Part Number | PJ24208RT |
| Alternative Inner Panels | Alternative inner panel options also available |
| Inner Panel Finish Options | White powder coated finished steel, unfinished aluminum, or fiberglass |
| Optional Inner Panel Width | 17.00 in (432 mm) |
| Optional Inner Panel Height | 21.00 in (533 mm) |
| Optional Back Panel – Steel | 0.105 in [2.67 mm] thick (white steel) |
| Optional Inner Panel Part No. | 18P2117 |
| Optional Back Panel – Aluminum | 0.100 in [2.54 mm] thick |
| Optional Back Panel – Fiberglass | 0.250 in [6.35 mm] thick |
| Inner Panel / Terminal Kit Mounting | Threaded brass inserts provided for optional inner panel or terminal kit mounting |
| Shipping Weight | 24 lbs (10.89 kg) |
| Hinge | (2X) 316 stainless steel hinges; door supported with a continuous stainless steel hinge |
| Finish | Gray fiberglass polyester |
| Gasket | FIP polyurethane gasket; captive oil resistant gasket provides a positive seal |
| Box Material | Compression molded fiberglass reinforced polyester |
| Impact Index | 6.78J (5 ft/lb) |
| Machinability | Easily punched, cut, or drilled |
| UV Protection | Enhanced UV inhibitors protect against outdoor weathering |
| Cover Material | Compression molded fiberglass reinforced polyester |
| Door Fasteners | (4X) 316 stainless steel lockable twist latches; stainless steel draw type "twist latch" fasteners with provision for padlocking |
| Window Material (Window-Cover Version) | Polycarbonate (bonded viewing window) |
| Brass Inserts With Plated Screws (Drawing) | (6X) 3/8"-16 brass inserts and plated carbon steel screws |
| Accessories | Additional Inner Panels; Terminal Kit Assemblies; Swing Panels; Pole Mounting Kit; PJ/PJU/PCJ Replacement Hardware Kits; PJ Stainless Replacement Mounting Feet; Climate Control; General Accessories |
| Ingress Protection | IP66 per IEC 60529 |
| Operating Temperature | 130°C to -40°C (266°F to -40°F) |
| UL | UL 508A Type 1, 2, 3, 4, 4X, 12 and 13 |
| CUL | cUL Type 1, 2, 3, 4, 4X, 12 and 13 per CSA 22.2 No. 94 |
| NEMA | Complies with NEMA Type 1, 2, 3, 4, 4X, 12, & 13 |
| RoHS Compliant | Yes |
| REACH Compliant | Yes |
Business account holders get access to exclusive pricing, volume discounts, and dedicated support. Create a free account to get started.
24.00 x 20.00 x 8.13 in (610 x 508 x 207 mm) H x W x D.
Optional inner panel 18P2117, 21.00 x 17.00 in (533 x 432 mm).
Four 316 stainless steel lockable twist latches, with a provision for padlocking.
Yes. The series ordering table notes that this size uses the larger mounting foot, fastened to 3/8"-16 brass inserts.
24 lbs (10.89 kg).
Yes, PJ24208RTW.
Hammond Manufacturing · 1413BGS
Hammond Manufacturing · 1413BKLGS
Hammond Manufacturing · 1413BKS
Hammond Manufacturing · 1413BNS
Hammond Manufacturing · 1413CGRALS
