Sized at 14.13 x 12.26 x 6.13 in (359 x 311 x 156 mm), the PJ14126T is a Type 4X wallmount enclosure in fiberglass reinforced polyester with a twist-latch door. It is aimed at control and instrument housings, electrical junction boxes and terminal wiring enclosures in places that may be hosed down, stay very wet, run hot or carry highly corrosive exposure.

Both box and cover are compression molded fiberglass reinforced polyester in gray, protected by enhanced UV inhibitors against outdoor weathering, and simple to punch, cut or drill. The drawing shows two lockable stainless steel twist latches (butterfly type, with a padlocking provision), a stainless steel hinge that the series describes as continuous, and a closed cell neoprene gasket that seals the door.

• Optional inner panel 14R1311: 12.75 x 10.88 in (324 x 276 mm), on four #10-32 brass inserts with plated carbon steel screws
• Inner panel materials: white powder coated steel, unfinished aluminum or fiberglass
• Four stainless steel mounting feet fasten to rear brass inserts for wall mounting
• Stainless steel mounting brackets and hardware provided

The PJ14126T is listed UL 508A Type 1, 2, 3, 4, 4X, 12 and 13, cUL listed to the same types per CSA 22.2 No. 94, and complies with IEC 60529 IP66. It is rated for 130°C to -40°C (266°F to -40°F) operation with an impact index of 6.78 J (5 ft/lb), meets RoHS and REACH, and ships at 9 lbs (4.08 kg).