The PJ14126RTW is a 14.13 x 12.26 x 6.13 in (359 x 311 x 156 mm) Type 4X wallmount enclosure with a raised cover and bonded polycarbonate viewing window. Integrators use this style for instrument enclosures and control housings where status lights or meters must be visible, in locations that are hosed down, very wet, hot or highly corrosive.
Construction is compression molded fiberglass reinforced polyester for box and cover, finished in gray with enhanced UV inhibitors, and easily punched, cut or drilled. Two stainless steel lockable twist latches close the cover and include a provision for padlocking; the drawing also shows a stainless steel hinge and a closed cell neoprene gasket.
The PJ14126RTW is UL 508A and cUL (CSA 22.2 No. 94) listed for Type 1, 2, 3, 4, 4X, 12 and 13, complies with NEMA Type 1, 2, 3, 4, 4X, 12 and 13 and IEC 60529 IP66, and is REACH and RoHS compliant. It operates between 130°C and -40°C (266°F to -40°F), has an impact index of 6.78J (5 ft/lb) and ships at 9 lbs (4.08 kg). Mounting hardware is included. The solid-lid model is PJ14126RT.
| Mounting Feet | (4) stainless steel mounting feet |
| Mounting Style | Wallmount |
| Included Hardware | Mounting hardware is included |
| Mounting Feet Hardware | (4) each #10-32 brass inserts and stainless steel feet screws; threaded brass inserts on the rear of the enclosure |
| Mounting Brackets & Hardware | Stainless steel mounting brackets and hardware provided for mounting to the rear of the enclosure |
| Series | PJ Series – Continuous Hinge Door with Twist Latches |
| Cover Style | Window cover |
| Product Type | Type 4X Polyester Junction Box w/ Raised Lid (Solid and Window) |
| Long Description | N4X Wallmount Encl - 14.13 x 12.25 x 6.13 - Fiberglass |
| Short Description | RAISED LID W/WINDOW TWIST LATC |
| Solid Cover Part No. | PJ14126RT |
| Window Cover Part No. | PJ14126RTW |
| Size H X W X D (Part Page) | 14.13 in x 12.26 in x 6.13 in (359 mm x 311 mm x 156 mm) |
| Enclosure Depth (Ordering Table) | 6.13 in (156 mm) |
| Enclosure Width (Ordering Table) | 12.26 in (311 mm) |
| Enclosure Height (Ordering Table) | 14.13 in (359 mm) |
| UPC | 623980703527 |
| UNSPSC | 39121324 |
| Part Number | PJ14126RTW |
| Alternative Inner Panels | Alternative inner panel options also available |
| Inner Panel Finish Options | White powder coated finished steel, unfinished aluminum, or fiberglass |
| Optional Inner Panel Width | 10.88 in (276 mm) |
| Optional Inner Panel Height | 12.75 in (324 mm) |
| Optional Back Panel – Steel | 0.075 in [1.91 mm] thick (white steel & galvannealed) |
| Optional Inner Panel Part No. | 14R1311 |
| Inner Panel / Terminal Kit Mounting | Threaded brass inserts provided for optional inner panel or terminal kit mounting |
| Shipping Weight | 9 lbs (4.08 kg) |
| Hinge | Stainless steel hinge; door supported with a continuous stainless steel hinge |
| Finish | Gray fiberglass polyester |
| Gasket | Closed cell neoprene gasket; captive oil resistant gasket provides a positive seal |
| Box Material | Compression molded fiberglass reinforced polyester |
| Impact Index | 6.78J (5 ft/lb) |
| Machinability | Easily punched, cut, or drilled |
| UV Protection | Enhanced UV inhibitors protect against outdoor weathering |
| Cover Material | Compression molded fiberglass reinforced polyester |
| Door Fasteners | (2) stainless steel lockable twist latches; stainless steel draw type "twist latch" fasteners with provision for padlocking |
| Window Material | Polycarbonate (bonded viewing window) |
| Brass Inserts With Plated Screws (Drawing) | (4) each #10-32 brass inserts and plated carbon steel screws |
| Accessories | Additional Inner Panels; Terminal Kit Assemblies; Swing Panels; Pole Mounting Kit; PJ/PJU/PCJ Replacement Hardware Kits; PJ Stainless Replacement Mounting Feet; Climate Control; General Accessories |
| Ingress Protection | IP66 per IEC 60529 |
| Operating Temperature | 130°C to -40°C (266°F to -40°F) |
| UL | UL 508A Type 1, 2, 3, 4, 4X, 12 and 13 |
| CUL | cUL Type 1, 2, 3, 4, 4X, 12 and 13 per CSA 22.2 No. 94 |
| NEMA | Complies with NEMA Type 1, 2, 3, 4, 4X, 12, & 13 |
| RoHS Compliant | Yes |
| REACH Compliant | Yes |
Business account holders get access to exclusive pricing, volume discounts, and dedicated support. Create a free account to get started.
PJ14126RTW has a raised window cover with a polycarbonate viewing window; PJ14126RT has a solid lid. Both are 14.13 x 12.26 x 6.13 in and use inner panel 14R1311.
The drawing specifies a closed cell neoprene gasket.
Yes, the door fasteners include a provision for padlocking.
130°C to -40°C (266°F to -40°F).
9 lbs (4.08 kg).
Hammond Manufacturing · 1413BGS
Hammond Manufacturing · 1413BKLGS
Hammond Manufacturing · 1413BKS
Hammond Manufacturing · 1413BNS
Hammond Manufacturing · 1413CGRALS
