PJ14126H pairs the 14.13 x 12.26 x 6.13 in (359 x 311 x 156 mm) PJ polyester junction box with a hinged cover secured by screws, so the cover stays attached during wiring and service. Typical uses listed for the series include instrument enclosures, electric, hydraulic or pneumatic control housings, junction boxes and terminal wiring enclosures in wet, hose-down, hot or corrosive locations.
The box and cover are compression molded fiberglass reinforced polyester with a gray finish and enhanced UV inhibitors, and are easily punched, cut or drilled. The PJ14126H drawing shows a stainless steel hinge, two #10-32 brass inserts with stainless steel captive cover screws on retaining O-rings, and a closed cell neoprene gasket.
Inside, four #10-32 brass inserts with plated carbon steel screws accept the optional 14R1311 inner panel measuring 12.75 x 10.88 in (324 x 276 mm). Back panel options shown on the drawing are 0.100 in aluminum, 0.075 in white steel and galvannealed, and 0.125 in fiberglass.
Four stainless steel mounting feet attach to rear brass inserts with stainless screws; the drawing gives 15.84 in (402.39 mm) over the feet and 0.34 in (8.74 mm) holes. Ratings are UL 508A and cUL (CSA 22.2 No. 94) Type 1, 2, 3, 4, 4X, 12 and 13 with IEC 60529 IP66 compliance, an operating range of 130°C to -40°C (266°F to -40°F) and a 6.78 J (5 ft/lb) impact index. Shipping weight is 9 lbs (4.08 kg); the part is REACH and RoHS compliant. For a lift-off cover in the same size, see PJ14126.
| Feet Hardware | (4) #10-32 brass inserts with stainless steel feet screws |
| Mounting Feet | (4) stainless steel mounting feet |
| Cover Style | Hinged cover with screws |
| Product Type | Type 4X polyester junction box, hinged screw cover |
| Long Description | N4X Wallmount Encl - 14.13 x x12.26 x 6.13 - Fiberglass |
| Short Description | NON METALLIC HINGED SCREW COV |
| Lift-Off Cover Equivalent | PJ14126 |
| Size (H X W X D) | 14.13 in x 12.26 in x 6.13 in (359 mm x 311 mm x 156 mm) |
| Mounting Foot Hole Centres | 15.19 in (385.83 mm) x 11.03 in (280.15 mm) |
| Overall Length Over Mounting Feet | 15.84 in (402.39 mm) |
| Compatible Accessory Types | Additional inner panels, terminal kit assemblies, pole mounting kit, PJ/PJU/PCJ replacement hardware kits, PJ stainless replacement mounting feet, window kits, climate control, general accessories |
| UPC | 623980950884 |
| UNSPSC | 39121324 |
| Panel Mounting | (4) #10-32 brass inserts with plated carbon steel screws |
| Inner Panel Part No. | 14R1311 |
| Inner Panel Size (H X W) | 12.75 in (324 mm) x 10.88 in (276 mm) |
| Optional Back Panel Thickness | 0.100 in (2.54 mm) aluminum; 0.075 in (1.91 mm) white steel & galvannealed; 0.125 in (3.18 mm) fiberglass |
| Shipping Weight | 9 lbs (4.08 kg) |
| Hinge | Stainless steel |
| Finish | Gray fiberglass polyester |
| Box Material | Compression molded fiberglass reinforced polyester |
| Cover Screws | (2) #10-32 brass inserts with stainless steel captive cover screws and retaining O-rings |
| Modification | Enclosure and matching cover are easily punched, cut, or drilled |
| Cover Material | Compression molded fiberglass reinforced polyester |
| Cover Fastening | Captive stainless steel screws in threaded brass inserts |
| Gasket (Series) | Captive oil resistant gasket provides a positive seal |
| Gasket (Drawing) | Closed cell neoprene |
| Mounting Feet Attachment | Threaded brass inserts on the rear of the enclosure; stainless steel mounting brackets and hardware provided |
| Optional Inner Panel Materials | White powder coated finished steel, unfinished aluminum, or fiberglass |
| Window Material (Where Fitted) | Polycarbonate |
| Inner Panel / Terminal Kit Mounting | 10-32 threaded brass inserts provided; mounting hardware included |
| Impact Index | 6.78 J (5 ft/lb) |
| UV Protection | Enhanced UV inhibitors protect against outdoor weathering |
| Operating Temperature | 130°C to -40°C (266°F to -40°F) |
| Application Environment | Suited where equipment may be hosed down or be very wet; high temperatures or highly corrosive environments |
| UL | UL 508A Type 1, 2, 3, 4, 4X, 12 and 13 |
| CUL | cUL Type 1, 2, 3, 4, 4X, 12 and 13 per CSA 22.2 No. 94 |
| NEMA | Complies with NEMA Type 1, 2, 3, 4, 4X, 12 and 13 |
| RoHS Compliant | Yes |
| REACH Compliant | Yes |
| IEC 60529 Ingress Protection | IP66 |
Business account holders get access to exclusive pricing, volume discounts, and dedicated support. Create a free account to get started.
They share the 14.13 x 12.26 x 6.13 in size. PJ14126H has a hinged cover on a stainless steel hinge with two captive cover screws; PJ14126 has a lift-off cover with four captive screws and is marked Type 6P/IP68 in the series table.
It complies with IEC 60529 IP66 and carries UL 508A and cUL Type 1, 2, 3, 4, 4X, 12 and 13 ratings.
The drawing specifies a closed cell neoprene gasket; the series describes it as a captive oil resistant gasket that provides a positive seal.
Yes. The optional 14R1311 inner panel measures 12.75 x 10.88 in (324 x 276 mm) and mounts to four #10-32 brass inserts.
The shipping weight is 9 lbs (4.08 kg).
Hammond Manufacturing · 1413BGS
Hammond Manufacturing · 1413BKLGS
Hammond Manufacturing · 1413BKS
Hammond Manufacturing · 1413BNS
Hammond Manufacturing · 1413CGRALS
