Need a corrosion-resistant box with quarter-turn style closure? The PJ12106T is a wallmount Type 4X junction box in fiberglass reinforced polyester, measuring 12.13 x 10.26 x 6.13 in (308 x 261 x 156 mm). Its door is held by two lockable 316 stainless steel butterfly-type twist latches, making it a fit for instrument enclosures, electric, hydraulic or pneumatic control housings and terminal wiring where equipment may be hosed down, very wet, hot or exposed to highly corrosive conditions.

Box and cover are compression molded fiberglass reinforced polyester with a gray finish and enhanced UV inhibitors for outdoor weathering. The material is easily punched, cut or drilled, and the drawing specifies a 0.14 in (3.56 mm) wall. A continuous 316 stainless steel hinge supports the door, and a captive oil resistant FIP polyurethane gasket forms a positive seal. The twist latches include a provision for padlocking.

• Optional inner panel 14R1109: 10.75 x 8.88 in (273 x 226 mm), mounted on four #10-32 brass inserts with hardware included
• Panel materials offered: white powder coated steel, unfinished aluminum, fiberglass
• Four 316 stainless steel feet fasten to rear brass inserts for wall mounting

The PJ12106T holds UL 508A Type 1, 2, 3, 4, 4X, 12 and 13 listings, cUL listings for the same types per CSA 22.2 No. 94, and IEC 60529 IP66 compliance. It is rated for operation from 130°C to -40°C (266°F to -40°F), has a 6.78 J (5 ft/lb) impact index, is RoHS and REACH compliant and has a shipping weight of 7 lbs (3.18 kg).