The PJ12106P16 is a 16-hole pushbutton enclosure for 30.5mm devices with a lift off screw cover. Built as part of the PJPBLC Series, it provides outstanding insulation and protection where equipment may be hosed down or be very wet, and is suited to applications with high temperatures or highly corrosive environments.

The box and matching cover are compression molded fiberglass reinforced polyester in gray, and the material is easily punched, cut, or drilled for added devices. Four captive stainless steel screws with retaining O-rings secure the cover into #10-32 threaded brass inserts, and a captive oil resistant gasket (closed cell neoprene on the drawing) provides a positive seal. Enhanced UV inhibitors protect against outdoor weathering.

The PJ12106P16 is 12.13 in H x 10.26 in W x 6.13 in D (308 mm x 261 mm x 156 mm), listed in its long description as 13.076 x 11.201 x 6.125, and ships at 7 lbs (3.18 kg). Stainless steel mounting feet and hardware are provided for mounting to the rear, and internal threaded brass inserts accept the optional 14R1109 inner panel (10.75 in x 8.88 in) or a terminal kit. The hinged cover version is PJ12106HP16; for 20 holes, see PJ12106P20.

The series is listed to UL 508A and CSA Type 1, 2, 3, 4, 4X, 12 and 13 and complies with NEMA Type 1, 2, 3, 4, 4X, 12 and 13 and IEC 60529, IP66. Operating range is 130°C to -40°C (266°F to -40°F), impact index 6.78J (5 ft/lb), and the enclosure is RoHS and REACH compliant.