The HJ443HLP is a 4 x 4 x 3 in (102 x 102 x 76 mm) Type 4 and Type 12 mild steel junction box from the HJ H Series, built with a continuous-hinge door held closed by clamps. Its compact footprint suits small terminal splices, instrument wiring and single-device control housings. It is designed for use as an instrument enclosure, an electric, hydraulic or pneumatic control housing, an electrical junction box or a terminal wiring enclosure.
The body is formed from 16 or 14 gauge steel and the cover from 14 gauge steel, with smooth, continuously welded seams and no knockouts, cutouts or holes, so you place entries exactly where your layout needs them. The door closes on a seamless poured-in-place gasket and is secured with stainless steel clamps and screws; its stainless steel continuous hinge can be removed by pulling the stainless steel hinge pin. The enclosure and cover are phosphatized and finished in recoatable smooth ANSI 61 gray powder coating.
The drawing shows a 4.31 x 4.31 in door, a 3.30 x 3.30 in door opening and 3.09 x 3.10 in of clear space available on the door. Welded brackets with 0.31 in mounting holes, spaced 4.75 in vertically and 2.00 in horizontally, give an overall mounted height of 5.50 in. The ordering table lists no optional mounting panel for this size. A bonding stud is provided on the door and a grounding stud inside the enclosure.
The HJ443HLP is listed to UL 508A Type 3R, 4, 12 and 13 (UL file E65324) and CSA Type 3R, 4, 12 and 13 (certificate LR21001), and complies with NEMA Type 3R, 4, 12 and 13 and IEC 60529 IP66. The series is intended for locations where equipment may be hosed down or otherwise be very wet, and for outdoor applications needing full weather protection. It is REACH and RoHS compliant and ships boxed at 2 lbs (0.91 kg).
| Enclosure Mounting | Welded mounting brackets |
| Mounting Hole Diameter (Drawing) | 0.31 in |
| Mounting Hole Spacing, Vertical (Drawing) | 4.75 in |
| Mounting Hole Spacing, Horizontal (Drawing) | 2.00 in |
| Series | HJ H Series |
| Cover Style | Continuous Hinge Door with Clamps |
| Product Type | Type 4, 12 Mild Steel Junction Box |
| Long Description | N4,12 J Box Hinged - 4x4x3 - Steel/Gray |
| Short Description | N4 J BOX HINGED 4X4X3 |
| Enclosure Depth | 3.00 in (76 mm) |
| Enclosure Width | 4.00 in (102 mm) |
| Enclosure Height | 4.00 in (102 mm) |
| Size (H X W X D) | 4 in x 4 in x 3 in (102 mm x 102 mm x 76 mm) |
| Door Size (H X W, Drawing) | 4.31 in x 4.31 in |
| Door Opening (H X W, Drawing) | 3.30 in x 3.30 in |
| Depth Including Door (Drawing) | 3.18 in |
| Clear Space Available On Door (H X W, Drawing) | 3.09 in x 3.10 in |
| Overall Height Including Mounting Brackets (Drawing) | 5.50 in |
| Series Accessories | Additional Inner Panels, Terminal Kit Assemblies, Swing Panel Kit, Door Clamping Hardware, Junction Box Quick Release Clamp, Junction Box Padlock Kit, Climate Control, General Accessories |
| UPC | 623980879000 |
| UNSPSC | 39121324 |
| Part Number | HJ443HLP |
| Packaging Type | Box |
| Shipping Weight | 2 lbs (0.91 kg) |
| Body | 16 or 14 gauge steel |
| Cover | 14 gauge steel |
| Hinge | Stainless steel continuous hinge, removable by pulling the stainless steel hinge pin |
| Seams | Smooth, continuously welded; no knockouts, cutouts or holes |
| Colour | Gray |
| Finish | Phosphatized, recoatable smooth ANSI 61 gray powder coating |
| Gasket | Seamless poured-in-place |
| Material | Mild steel |
| Grounding | Bonding stud on door; grounding stud in the enclosure |
| Door Closure | Stainless steel clamps and screws |
| IP Rating | IP66 (IEC 60529) |
| Protection | Where equipment may be hosed down or otherwise be very wet, or outdoor applications for full weather protection |
| Enclosure Type Ratings | Type 3R, 4, 12 and 13 |
| UL | UL 508A Type 3R, 4, 12 and 13 |
| CSA | CSA Type 3R, 4, 12 and 13 |
| NEMA | Complies with NEMA Type 3R, 4, 12 and 13 |
| UL File # | E65324 |
| CSA Cert. # | LR21001 |
| RoHS Compliant | Yes |
| REACH Compliant | Yes |
| Applicable Standards | EN 60204-1: 2006 / IEC 60204-1: 2005-10; EN 60529: 1992 + A2: 2013 / IEC 60529: 2001-02 + A2: 2013-08 |
| Additional Declarations | RoHS Directive 2011/65/EU; Directive (EU) 2015/863 |
| EU Declaration Of Conformity | Low Voltage Directive 2014/35/EU |
Business account holders get access to exclusive pricing, volume discounts, and dedicated support. Create a free account to get started.
It is listed to UL 508A Type 3R, 4, 12 and 13 (UL file E65324) and CSA Type 3R, 4, 12 and 13 (certificate LR21001), and complies with NEMA Type 3R, 4, 12 and 13 and IEC 60529 IP66.
The enclosure is 4 in H x 4 in W x 3 in D (102 x 102 x 76 mm). The drawing shows a 3.30 x 3.30 in door opening, a 4.31 x 4.31 in door and 3.09 x 3.10 in of clear space available on the door.
The series ordering table lists no optional mounting panel for the HJ443HLP.
The door rides on a stainless steel continuous hinge and is secured with stainless steel clamps and screws. The hinge can be removed by pulling the stainless steel hinge pin.
No. The seams are smooth and continuously welded, without knockouts, cutouts or holes.
Welded brackets provide for enclosure mounting; the drawing shows 0.31 in holes spaced 4.75 in vertically and 2.00 in horizontally. A bonding stud is on the door and a grounding stud is in the enclosure.
Hammond Manufacturing · 1413BGS
Hammond Manufacturing · 1413BKLGS
Hammond Manufacturing · 1413BKS
Hammond Manufacturing · 1413BNS
Hammond Manufacturing · 1413CGRALS
