The CN4ST4404SS is a Type 4X stainless steel splitter trough built for 4-wire power distribution, rated 400/400 A (CU/AL) with factory-installed splitter blocks. It suits electricians, panel builders and facilities teams tapping a feeder into branch circuits where the enclosure must stand up to outdoor or more hostile environments, since its stainless steel construction provides corrosion resistance.

The enclosure measures 48.00 in (1219 mm) high, 10.00 in (254 mm) wide and 6.00 in (152 mm) deep. The drawing shows a 47.97 x 9.97 in door, a 46.36 x 8.49 in door opening and an included 46.17 x 8.17 in inner panel.

Construction is formed and spot welded 14 gauge 304 stainless steel (the series uses 14 gauge when the width is 8 in or more), with smooth, continuously welded seams ground smooth and a formed lip on the enclosure to exclude flowing liquids and contaminants. It uses a seamless poured-in-place gasket. The cover and enclosure are natural stainless steel with a smooth brushed finish; the inner panel is finished in white powder coating and mounts on collar studs.

Door latches use a quarter-turn slot that requires a tool to open. Hinges are 304 stainless steel with stainless steel hinge pins, and the doors can be removed for modifications and are interchangeable. A hardware kit with panel mounting nuts and sealing washers for the wall mounting holes is included. The trough is CSA Certified Type 3R, 12, 4X and complies with IEC 60529, IP66. The series is designed for distribution of up to 600 A (max) service at 600 V max, with 75 °C conductor ampacity permitted.

Optional grounding kit CGK400 and splitter block reference CSBL400 apply to this size. The 3-wire version of the same size is CN4ST4403SS.