Capture two complementary kick-drum signals from one microphone position. The AE2500 places a dynamic element and a condenser element in one housing so an engineer can retain the focused attack of the dynamic capsule while separately controlling the condenser capsule's extended detail and low-frequency response. Separate outputs allow each element to reach its own preamp channel, where gain, equalization, compression and balance can be set independently. For close placement at a kick-drum port or inside the shell, this arrangement reduces the placement compromises involved in using separate dynamic and condenser microphones. The dynamic element provides a high-SPL-oriented signal for the beater impact, while the condenser element captures additional tonal detail. Engineers can record both channels for later mixing or blend them at the console for a single reinforced kick-drum sound. Part number 152001-02 identifies the AE2500 dual-element kick drum microphone. Its distinguishing characteristic is the paired dynamic-and-condenser design in one microphone body, rather than a single transducer intended to cover the entire drum sound. Use separate microphone inputs for the two element outputs and supply phantom power to the condenser channel where required. This configuration suits drum kits where channel-level control over punch, definition and body matters in both live and studio environments.