TSC P220063-901 4-Inch 203 dpi Printhead Assembly

Restore thermal imaging capability in a compatible T6000 industrial label printer with a 4-inch, 203 dpi printhead assembly. The printhead applies controlled heat to direct-thermal media or thermal-transfer ribbon, forming the barcode, text, graphics, and variable data printed on each label. Its 203 dpi density supports standard industrial labeling where dependable readable barcodes and clearly formed text are required. This non-RFID configuration is intended for T6000 printer deployments that do not require RFID encoding hardware. The 4-inch print width aligns with common shipping, warehouse, manufacturing, and compliance-label formats while retaining the lower-density 203 dpi print format used for many everyday label applications. Replacing a worn printhead can address faded areas, missing dots, uneven darkness, or reduced barcode scan performance caused by printhead wear. P220063-901 is a service printhead assembly rather than a complete printer. Match the installed printer configuration to the T6000 platform, 4-inch print width, 203 dpi resolution, and non-RFID requirement before replacement. Using the correct resolution matters because printhead elements, printer electronics, and media calibration are configured around the printer's native print density. Handle the assembly carefully during installation to avoid contaminating or damaging the thermal element surface.