
| Teltonika Web Api | Teltonika Networks Web API (beta): Configurable endpoints to retrieve or change data |
| Teltonika Networks Web Api Beta Support | Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com |
| Data Rate | USB 2.0 |
| Applications | Samba share, USB-to-serial |
| Storage Formats | FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4 |
| External Devices | HDD, flash drive, additional modem, printer, USB-serial adapter |
| Gre | GRE tunnel, GRE over IPsec |
| Sstp | Client |
| Tinc | Client and server with encryption, authentication and compression |
| Dmvpn | Phase 2, Phase 3 and Dual Hub support |
| Ipsec | XFRM, IKEv1, IKEv2, 14 encryption methods (3DES, DES, AES128/192/256, AES-GCM 8/12/16) |
| Openvpn | Multiple clients and a server simultaneously, 27 encryption methods |
| Stunnel | TLS encryption proxy for existing clients and servers |
| Zerotier | Client |
| Pptp L2tp | Simultaneous client/server, L2TPv3, L2TP over IPsec |
| Tailscale | Encrypted point-to-point connections over WireGuard |
| Wireguard | Client and server |
| Openvpn Encryption | DES, RC2, 3DES, DESX, Blowfish, CAST5, AES-128/192/256 (CBC, CFB, CFB1, CFB8, OFB, GCM) |
| Supported Modes | Station, Outstation |
| Supported Connection | TCP, USB |
| Connector | 4-pin industrial DC socket |
| Poe Passive | Over spare pairs via LAN1, Mode B, 9–50 VDC; not IEEE 802.3af/at/bt compatible |
| Power Consumption | Idle < 5 W, Max < 18 W |
| Input Voltage Range | 9–50 VDC, reverse polarity protection, surge protection >51 VDC 10 µs max |
| Supported Modes | Router |
| Configuration Options | Multiple BACnet/IP interfaces, network number assignment, preconfigured BDT entries for BBMD |
| Supported Connection Types | IP |
| Apn | Auto APN |
| Sms | status, configuration, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, scheduled SMS, autoreply, SMPP |
| Ussd | Send and read USSD messages |
| Bridge | Direct connection between mobile ISP and LAN device |
| Status | IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, RSSI, SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, MNC |
| Sim Switch | 2 SIM cards, auto-switch on weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection |
| Passthrough | Mobile WAN IP assigned to a LAN device |
| 3gpp Release | Release 16 |
| Multiple Pdn | Different PDNs for multiple network access and services |
| Mobile Module | 5G Sub-6 GHz SA, NSA 2.4, 3.4Gbps DL (4x4 MIMO) 900, 550Mbps UL (2x2 MIMO); 4G LTE: DL Cat 19 1.6Gbps (4x4 MIMO), UL Cat 18 200Mbps |
| Framed Routing | Supports an IP network behind 5G UE |
| Band Management | Band lock, used band status display |
| Block Allow List | Operator block/allow list by country or separate operators |
| Sim Pin Management | Set, change or disable SIM PIN |
| Sim Idle Protection | Periodic switch to unused SIM to prevent blocking |
| Sim Pin Code Management | SIM PIN code management enables setting, changing, or disabling the SIM card's PIN |
| Sim Idle Protection Service | Provides the possibility to configure the router to periodically switch to the unused SIM card and establish a data connection in order to prevent the SIM card from being blocked |
| Supported Modes | Server, Client |
| Custom Registers | Modbus TCP custom register block requests read/write to a file on the router |
| Supported Data Formats | 8-bit INT/UINT; 16-bit INT/UINT (MSB or LSB first); 32-bit float/INT/UINT (ABCD, DCBA, CDAB, BADC), HEX, ASCII |
| Supported Connection Types | TCP, USB |
| Supported Modes | Client, Server |
| Supported Connection Types | TCP |
| Mpn | RUTM59000000 |
| Upc | 4779051844562 |
| Wifi | Not included |
| Brand | Teltonika Networks |
| Model | RUTM59 |
| Hs Code | 851762 |
| Hts Code | 8517.62.00 |
| Package Type | Standard package with US PSU |
| Hardware Version | RUTM59 0***** / North America |
| Ddns | More than 77 providers, others configurable manually |
| Dhcp | Static/dynamic allocation, relay, server configuration, status, static leases (MAC with wildcards) |
| Sshfs | Mount remote file system via SSH |
| Hotspot | Captive portal, internal/external RADIUS, RADIUS MAC auth, SMS authorisation, SSO, landing pages, walled garden, user scripts, URL parameters, user groups and limits, user management, 9 customisable themes plus upload/download |
| Qos Sqm | Priority queuing by source/destination, service, protocol or port, WMM, 802.11e |
| Routing | Static, dynamic (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), policy-based |
| Firewall | Port forward, traffic rules, custom rules, TTL target customisation |
| Vrf Support | Initial VRF support |
| Dns Over Https | DoH proxy |
| Load Balancing | Across multiple WAN connections |
| Network Backup | Mobile, VRRP, wired, each usable as automatic failover |
| Port Management | View, enable/disable ports, auto-configuration, transmission speed |
| Network Topology | Visual network map |
| Voip Passthrough | H.323 and SIP-ALG NAT helpers |
| Network Protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, WOL, VXLAN |
| Traffic Management | Real-time monitoring, usage history |
| Firewall Status Page | Statistics, rules and rule counters |
| Connection Monitoring | Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP link inspection |
| Contents | In the Box: RUTM59 router, 18 W US PSU, 4 x swivel SMA mobile antennas, 1 x adhesive GNSS antenna (3 m cable), 1.5 m Ethernet cable, SIM adapter kit, Quick Start Guide |
| Documents | Documentation: RUTM59 Datasheet, RUTM59 Flyer |
| Lan | 4 x 10/100/1000 Mbps, IEEE 802.3/802.3u/802.3az, auto MDI/MDIX |
| Wan | 1 x 10/100/1000 Mbps, IEEE 802.3/802.3u/802.3az, auto MDI/MDIX |
| Weight | 530 g |
| Dimensions | 132 x 44.2 x 95 mm |
| Casing Material | Anodised aluminium housing and panels |
| Shipping Weight | 2.15 lb |
| Mounting Options | DIN rail, wall, flat surface (additional kit required) |
| Vlan | Port and tag-based separation |
| 802 1x | Port-based network access control client |
| Firewall | Preconfigured rules via WebUI, unlimited configuration via CLI, DMZ, NAT, NAT-T, NAT64 |
| Web Filter | Block list and allow list |
| Access Control | SSH, Web interface, CLI and Telnet |
| Authentication | PSK, digital and X.509 certificates, TACACS+, internal/external RADIUS, IP and login attempt blocking, time-based login blocking, random password generator |
| Attack Prevention | DDoS (SYN flood, SSH, HTTP/HTTPS) and port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL, FIN) |
| Certificate Manager | CA, server, client, Let's Encrypt, SCEP certificates |
| Mobile Quota Control | Data limit, custom period, start time, warning limit, phone number |
| Dlms Support | Standard protocol for utility meter data exchange |
| Supported Modes | Client |
| Supported Connection Types | TCP |
| Safety | FCC/ISED 47 CFR § 2.1091; KDB 447498 D04 v01; RSS-102 Issue 5 Amendment 1 |
| Emc Emissions Immunity | FCC/ISED 47 CFR Part 15 Subpart B; ICES-003 Issue 7 (October 2020) |
| Input | 1 x digital input (0–6 V low, 8–50 V high) |
| Events | Email, RMS, SMS |
| Output | 1 x digital open collector output, max 50 V, 300 mA |
| Io Juggler | I/O conditions trigger events |
| Modbus Mqtt Gateway | Commands and data to/from Modbus server via MQTT broker |
| Functionalities | Centralized management of Teltonika TAP access points and managed switches (pairing, grouping, FOTA, monitoring, reboot scheduling, SSID configuration, VLAN assignment) |
| Supported Modes | Manager |
| Thingworx | WAN type, WAN IP, operator name, signal strength, network type |
| Cumulocity | Device model, revision, serial number, WAN type and IP, cell ID, ICCID, IMEI, connection type, operator, signal strength; reboot and firmware upgrade actions |
| Aws Iot Core | AWS cloud interaction with Jobs support |
| Azure Iot Hub | Data to Server integration, Direct method RutOS API calls, Plug and Play with DPS zero-touch provisioning |
| Protocol | HTTP(S), MQTT, Azure MQTT |
| Data To Server | Aggregate parameters from multiple sources and protocols to a single server; custom Lua scripting |
| 5g Nr Sa | n2, n5, n7, n12, n13, n14, n25, n26, n29, n30, n38, n41, n48, n66, n70, n71, n77, n78 |
| 5g Nr Nsa | n2, n5, n7, n12, n13, n14, n25, n26, n29, n30, n38, n41, n48, n66, n70, n71, n77, n78 |
| 4g Lte Fdd | B2, B4, B5, B7, B12, B13, B14, B17, B25, B26, B29, B30, B66, B71 |
| 4g Lte Tdd | B38, B41, B42, B43, B48 |
| 5g Dl 4x4 Mimo | n2, n5, n7, n12, n13*, n14, n25, n26*, n29, n30, n38, n41, n48, n66, n70, n71, n77, n78 |
| Gnss | GPS, GLONASS, BeiDou, Galileo, QZSS |
| Nmea | NMEA 0183 |
| Ntrip | Networked Transport of RTCM via Internet Protocol |
| Geofencing | Multiple configurable zones |
| Coordinates | Via WebUI, SMS, TAVL, RMS |
| Server Software | TAVL, RMS |
| Io | 1 x digital input, 1 x digital output on 4-pin power connector |
| Sim | 2 x Mini SIM (2FF) slots, 1.8 V/3 V, external holders |
| Usb | 1 x USB-A |
| Other | 1 x grounding screw |
| Power | 1 x 4-pin connector |
| Reset | Reboot / user default / factory reset button |
| Antennas | 4 x SMA mobile, 1 x SMA GNSS |
| Ethernet | 5 x RJ45, 10/100/1000 Mbps |
| Status Leds | 3 x WAN, 3 x mobile type, 3 x mobile strength, 10 x Ethernet, 1 x power |
| Rms | Teltonika Remote Management System |
| Sms | Status, configuration |
| Ssh | v1, v2 |
| Call | Reboot, status, mobile data on/off, output on/off, answer/hang-up with timer |
| Fota | Firmware update from server, automatic notification |
| Mqtt | Broker, publisher |
| Snmp | v1, v2, v3, SNMP Trap, brute force protection |
| Status alerts of various services | |
| Tr 069 | OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly Tech, AVSystem |
| Web Ui | HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, update notifications, event/system/kernel logs, Internet status |
| Json Rpc | Management API over HTTP/HTTPS |
| Ingress Protection | IP30 |
| Operating Humidity | 10% to 90% non-condensing |
| Operating Temperature | -40 °C to 75 °C |
| Rms | Bulk FW/configuration updates |
| Fota | Update FW |
| Web Ui | FW update from file, check FW on server, configuration profiles, backup |
| Keep Settings | Update FW without losing configuration |
| Factory Settings Reset | Factory Reset: Restores all settings, IP address, PIN and user data to defaults |
| Package Manager | Install additional software |
| Operating System | RutOS (OpenWrt-based Linux) |
| Development Tools | SDK with build environment |
| Gpl Customization | Custom branded firmware and web UI |
| Supported Languages | Busybox shell, Lua, C, C++, Python, Java (Package Manager) |
| Cpu | MediaTek Dual-Core 880 MHz, MIPS1004Kc |
| Ram | 256 MB DDR3 |
| Flash Storage | 16 MB serial NOR, 256 MB serial NAND |
| Regulatory | FCC, ISED, WEEE, MTCTE |
Business account holders on Cellular Gateways typically save 13% vs. retail pricing. Create a free account to see your price.
No. The RUTM59000000 is a wired router with five Gigabit Ethernet ports. For wireless coverage, its Site Manager function can centrally manage Teltonika TAP access points and managed switches, including SSID configuration and VLAN assignment.
It supports 5G NR n2, n5, n7, n12, n13, n14, n25, n26, n29, n30, n38, n41, n48, n66, n70, n71, n77 and n78 in both SA and NSA modes. LTE-FDD coverage is B2, B4, B5, B7, B12, B13, B14, B17, B25, B26, B29, B30, B66 and B71. LTE-TDD coverage is B38, B41, B42, B43 and B48.
The router holds two Mini SIM (2FF) cards. It switches automatically on weak signal, data limit, SMS limit, roaming, no network, network denied or data connection failure. SIM idle protection can periodically bring up the unused SIM so that it is not blocked.
The standard package includes an 18 W US power supply. The router accepts 9–50 VDC through a 4-pin industrial connector. It can also be powered by passive PoE on LAN1, which is not compatible with IEEE 802.3af/at/bt. The box also contains four swivel SMA mobile antennas, an adhesive GNSS antenna with a 3 m cable, a 1.5 m Ethernet cable, a SIM adapter kit and a Quick Start Guide.
Yes. DIN rail, wall and flat surface mounting are supported, and each of these options requires an additional mounting kit.
Save 13%TELTONIKA NETWORKS · RUT951A10J00
Save 13%TELTONIKA NETWORKS · RUT951A10P00
Save 5%TELTONIKA NETWORKS · RUT142000000
Save 21%TELTONIKA NETWORKS · RUT145000000
Save 5%TELTONIKA NETWORKS · RUT241233000
Exclusive pricing and Net-30 terms. Sign in or create a free account.
Create Free Business Account