Teltonika PR315USA 18 W US 2-Pin Power Supply

Supply compatible equipment with 12 VDC at up to 1.5 A using the Teltonika PR315USA 18 W AC/DC adapter. Its US Type A input plug connects to US-style outlets, and its rated input accepts 100–240 VAC at 50 / 60 Hz. Input current is specified at 0.6 A. The output cable extends 2,000 mm from the adapter and ends in two wires with crimped cord end terminals, providing a connection for equipment that accepts terminal-ended DC power wiring. Choose this version when the installation requires a US mains plug and a two-wire output connection. The output termination is particularly relevant when replacing an existing adapter: the receiving equipment must accept 12 VDC, draw no more than 1.5 A, and accommodate the supplied terminals. The 18 W rating establishes the available output power, while the cable length provides 2 m of reach between the outlet and the powered equipment. Check terminal polarity against the equipment’s power connection before installation. Electrical specifications include short circuit protection, a 60 A inrush current, and a primary-to-secondary dielectric withstand test rating of 4,242 VDC. Absolute input limits are 90–264 VAC and 47–63 Hz; the specified output voltage limits are 11.4–12.6 VDC. These limits are separate from the nominal operating ratings. The adapter weighs 106 g and has a specified MTBF of 50,000 hours. Its safety specification references CSA C22.2 No. 62368-1-14, second edition, with EMC specifications referencing FCC Part 15, Subpart B: 2023 and ANSI C63.4:2014 as amended by ANSI C63.4:2017.