Teltonika PR2PP10B 4-Pin to 4-Pin Power Cable for RUT, RUTX and TSW Devices

When the power source and the router cannot sit next to each other, you need a cable that speaks Teltonika's connector language on both ends. The PR2PP10B carries the locking 4-pin power connector at each end, letting you extend a power run or bridge between Teltonika power accessories and the device without adapters, splices or modified leads. Because both ends use the factory connector, the cable preserves the full 4-conductor path — power plus the I/O lines that many Teltonika routers carry on the power connector. That matters in installations where an ignition-sense or digital I/O signal travels alongside DC power: the PR2PP10B keeps those circuits intact across the extension. Teltonika lists compatibility across a wide slice of its portfolio: RUT240, RUT241, RUT360, RUT950, RUT951, RUT955, RUT956, RUTX08, RUTX10, RUTX11, RUTX12, RUTX14, RUTX50 and the TSW100 and TSW110 switches. That breadth makes it a sensible stock item for integrators who build with mixed Teltonika hardware — one cable SKU covers routers and switches alike. Typical scenarios include mounting a router high on a wall or ceiling while the power supply stays in an accessible cabinet, routing power through tight conduit where a molded adapter body will not fit, and vehicle builds where the supply point and the router bracket are separated by a bulkhead. The cable is passive, so observe the input voltage range of the connected device and route it away from high-noise wiring where practical.