Protect a Sony a7 II, a7 III, or a7 IV camera body with a lens attached inside custom-cut foam configured for two additional lenses, lens hoods, and accessories. The 3I-13096A74 uses removable foam sections to accommodate different lens sizes, including a longer 70-200 mm lens mounted on the camera. Convoluted lid foam and a solid base layer surround the equipment when the case is closed. An IP67 gasket seal keeps dust and water out of the enclosure, while the integrated pressure relief valve helps equalize internal pressure during altitude or temperature changes. Dual trigger-release latches secure the lid, and reinforced padlock holes accept user-supplied locks for added transport security. A molded-in hinge supports repeated opening and closing without relying on an externally attached hinge assembly. The black iSeries hard-shell enclosure uses polypropylene copolymer resin selected for impact resistance and resistance to ultraviolet exposure, solvents, corrosion, and fungi. An integrated handle supports hand carrying between vehicles, sets, and field locations. This configuration differs from a general-purpose empty case by supplying foam cut specifically around an attached Sony a7-series camera, two spare lenses, and accessory spaces.