Connect four cellular antenna ports on a compatible router to a single omni-directional housing with the Parsec Akita PRO antenna. Supporting 4×4 MIMO cellular operation across specified frequency ranges from 617 MHz to 6 GHz, it covers 4G LTE, 5G and C-Band applications. PRO4A4L01W combines four cellular elements, 1 ft LSR240 cables, SMA male connectors and a white radome. This configuration has no GPS element or Wi-Fi elements, making it a cellular antenna for routers that need four external cellular connections. Install the IP54 housing indoors or outdoors for fixed wireless access, primary cellular connectivity, network failover or remote video monitoring. Wall, pole and panel mounting accommodate offices, retail premises, warehouses, recreational vehicles and residential installations. The enclosure measures 15.5 × 9.5 × 1.4 inches excluding the bracket, and pole mounting accommodates mast diameters from 2.5 to 3.5 inches. Operating temperatures span -30 °C to 85 °C. For wall installation, use a non-metallic mounting surface and keep the antenna clear of wiring and metal studs, which can degrade RF performance. Choose this configuration when short antenna leads suit the router location: its 1 ft cables distinguish it from longer-cable configurations, while its four cellular elements distinguish it from versions that add GPS. Cellular peak gain varies by frequency range from 2 to 5 dBi, with typical radiated efficiency from 70% to 85%. The cellular interface uses 50 Ω impedance and supports a maximum input power of 10 W. Tighten the SMA connectors within the specified 3 to 5 inch-pound torque range.