The C29FR-FP-1SP-GNSS is a short jumper for connecting equipment that sits close to its antenna feed. Typical examples are an FME-terminated antenna lead inside a cabinet and a GNSS receiver or router with an SMA port. At 1 m (3.3 ft), it keeps runs tidy and cable loss minimal. Both ends are plugs, FME male and SMA male, and GNSS labels identify the lead during installation and service. The assembly uses Panorama's CS29FR cable (part SR1-029-FRZH-B), which has two layers of shielding. An aluminium foil inner screen sits under a tin-plated copper braid with no less than 95% coverage. Together they give shielding effectiveness better than -90 dB at 400 MHz, measured to IEC 61196-1. Impedance is 50 Ω ± 2 Ω at 1 GHz and 50 Ω ± 4 Ω at 2 GHz. Typical attenuation is 2.2 dB, 4 dB and 5.5 dB per 10 m at 400 MHz, 1 GHz and 2 GHz. Over 1 m that works out to roughly 0.4 dB at 1 GHz for the cable alone. The black jacket is UV-stabilised, flexible Pacrel FRP5385B-1. It is flame retardant and halogen free, certified to ECE R118.03 (E11*118R03/00*1311*00), and compliant with EN 6722:2006 §12 and EN 45545-2 HL2 for safety-critical installations. Other ratings: • Operating temperature: -35 °C to +80 °C • Minimum bend radius: 25 mm for a one-time bend, 50 mm for repeated flexing • Voltage withstand: 1000 VDC • Jacket spark test: 3000 V RMS