Panorama C29SP-3SJ-CELL1 3 m CS29 Low-Loss Coax Cable, SMA Male to SMA Female with Cell 1 Label

The C29SP-3SJ-CELL1 is a 3 m Panorama Antennas cable assembly for extending or routing an RF feed between an antenna and a router, gateway or modem. One end has an SMA plug (male) and the other has an SMA socket (female), so the assembly extends an existing SMA connection. A Cell 1 label identifies the run, which helps installers keep feeds on the correct cellular port in multi-cable installations. The assembly uses Panorama's CS29 cable (part SR1-029-B). CS29 is a 5 mm (0.20 in) cable with two layers of shielding: a tin-plated copper braid with no less than 95% coverage over an aluminium foil inner shield. Panorama states that this construction significantly reduces attenuation, particularly at higher frequencies. Typical loss is 2.2 dB per 10 m at 400 MHz, 4 dB per 10 m at 1 GHz and 5.5 dB per 10 m at 2 GHz. Shielding effectiveness is better than -95 dB to IEC 61196-1 at 400 MHz. Impedance is 50 Ω ± 2 Ω at 1 GHz and 50 Ω ± 4 Ω at 2 GHz. The stranded plain copper centre conductor and white cellular polyethylene dielectric keep the cable flexible for routing through enclosures, cabinets and vehicles. The black TPE jacket is rated from -40°C to +80°C (-40°F to 176°F). The cable is rated for 1000 VDC voltage withstand and a 3000 V RMS jacket spark test. Panorama's CS29 cable datasheet covers the full construction and electrical data.