Connect C5-equipped communications equipment to a North American AC outlet with a cord that terminates in an IEC 60320 C5 device connector. The C5 connector is the compact three-contact appliance-end interface commonly called a cloverleaf connector. Its keyed shape mates with equipment that has the corresponding C6 inlet, providing the physical AC connection between the device and wall power. Mitel 50008348 has a North American plug at the supply end and a C5 connector at the equipment end. This makes it suitable where the installed device has a C6 inlet and the available building receptacle accepts a North American plug. It is a direct power cord, not a power adapter: it supplies the connection path from the AC receptacle to the equipment inlet. Use this cord when replacing an existing C5 power lead or when a C5-equipped device must be connected in a North American installation. Check the device inlet before ordering: a C5 connector has three lobes and will not mate with the rectangular C13 or C19 equipment inlets used by other AC cord types. The North American plug and C5 equipment connection are the defining interfaces of this cord.