LifeSafety Power FPO150/250 16-Door Access Control Power Enclosure

Centralize lock power, auxiliary DC distribution, and Mercury controller mounting for a 16-door access-control panel. LifeSafety Power FPO150/250-2C83D8PE8M1/P16-A provides 16 fused relay lock-control outputs, each rated at 3 A and selectable for fire alarm interface operation, fail-safe locking, or fail-secure locking. This arrangement supports installations where lock behavior must be configured per controlled opening rather than applied uniformly across the entire enclosure. The enclosure provides 24 Class 2 power-limited DC auxiliary outputs rated at 2.5 A per output. Each auxiliary circuit can be assigned to Bus 1 or Bus 2, separating downstream devices across two distribution paths. Feed-stated power configurations support 12 VDC or 24 VDC operation, with ratings of 12 A at 12 VDC or 6 A at 24 VDC for the 150 W supply configuration, and 20 A at 12 VDC or 10 A at 24 VDC for the 250 W supply configuration. An E8 enclosure measures 36 inches high by 30 inches wide by 4.5 inches deep and includes a Mercury backplate with Panduit cable-management hardware. The configuration is specified for 16 doors and accommodates Mercury MR52 and EP1502 controller board(s), placing power distribution and controller hardware in the same cabinet. It suits larger openings groups that need individually protected lock circuits, auxiliary device power, and organized field wiring.