LifeSafety Power FPO75 4-Door Mercury Power System

Support a four-door Mercury access control installation with separated system and lock power distribution from one enclosed power configuration. FPO75-B100C4D8E2M provides 75 W maximum power and identifies 12 V and 24 V, 2 A system and lock power circuits for access-control hardware and powered locking devices. The configuration suits installations that need protected output distribution rather than a single shared field-power connection. Four fused lock outputs provide individually protected connections for locking circuits, while eight fused auxiliary outputs extend protected distribution to related access-control loads. This output arrangement gives installers dedicated branch circuits for door hardware and auxiliary equipment within the same power enclosure. Fused outputs help localize a downstream wiring fault to its affected circuit instead of placing every connected load on one unprotected output. The E2M enclosure measures 20 in H × 16 in W × 4.5 in D, providing a defined cabinet format for centralized access-control power wiring. Its four-door Mercury focus, 75 W maximum rating, four lock outputs, and eight auxiliary outputs distinguish this configuration for installations requiring both controller-side and locking-device power distribution. Match the required system voltage, lock voltage, output count, enclosure space, and controller architecture before installation.