HES 5200 Complete Electric Latchbolt Strike

Control access at a latchbolt-equipped opening by electrically managing the strike at the door frame. This hardware works with a compatible latchbolt lock so an access-control system can release the door without changing the lock’s basic latching function. The strike is installed on the frame side of the opening, where it receives the latchbolt when the door closes. That arrangement makes it relevant for controlled interior doors, perimeter openings, and other doors that require an electrically released latchbolt. HES 5200C-LBSM is supplied as a complete electric latchbolt strike configuration. The 5200 designation identifies the product model family, while the complete configuration identifies the ordering variant as a finished strike assembly. It addresses the strike-side portion of an electrified opening; a compatible latchbolt lock, door frame preparation, and the controlling electrical system remain specific to the installed door. Before installation, evaluate door handing, frame material and preparation, latchbolt geometry, door alignment, and the control method required at the opening. These physical interfaces determine whether a strike can receive and retain the latch correctly through normal door movement. Specify the strike for the actual lock and frame combination, then coordinate its electrical connection with the release logic used at the door. This is important where a door must remain latched when closed but be released under authorized control.