The PMB4045KIT1 is a stainless steel pole mount kit that lets you fix a compatible Hammond enclosure securely to a pole. It is the 40-45mm kit with the small clamp, rated for poles up to 7" (178 mm) in diameter, and is intended for installers mounting control, sensor or communications enclosures on posts and masts.
The kit is designed for the flanged 1555BF and 1555CF enclosures and the 1590ZGRP081, 1590ZGRP082, 1590ZGRP083, 1590ZGRP084 and 1590ZGRP131 enclosures, all of which use M4-0.7 x 20mm screws. Each kit includes 2 brackets, 2 clamps and hardware, and all parts are made from stainless steel.
Brackets are installed with a 3mm hex key and 7mm nut drive for M4 hardware, torqued to 11.5-13.5 lbf-in (130-150 cN-m). To fit to the pole, thread each clamp through the desired bracket slot, wrap it around the pole, thread it back through the bracket and, while holding the enclosure against the pole, tighten with a 5/16in (8mm) nut drive.
Replacement hardware is available as SCPMB1-20 and replacement small clamps as HCLAMP1. For poles up to 15", choose the PMB4045KIT2.
| Type | Pole Mounting Kit |
| Series | PMB Series (Pole Mount Kit) |
| Part Number | PMB4045KIT1 |
| Kit Contents | 2 stainless steel pole mounting brackets, 2 stainless steel strap clamps, stainless steel mounting hardware |
| Kit Designation | 40-45mm Pole Mount Kit Small Clamp |
| Compatible Enclosures | 1555F flanged: 1555BF, 1555CF; 1590ZGRP: 1590ZGRP081, 1590ZGRP082, 1590ZGRP083, 1590ZGRP084, 1590ZGRP131 |
| Hole Spacing (Drawing) | 39.00 mm [1.54 in]; 46.00 mm [1.81 in]; 57.15 mm [2.25 in] |
| Bracket Width (Drawing) | 46.99 mm [1.85 in] |
| Mounting Hole (Drawing) | 4.20 mm [.17 in] |
| Bracket Height (Drawing) | 43.38 mm [1.71 in] |
| Bracket Length (Drawing) | 74.50 mm [2.93 in] |
| Other Drawing Dimensions | 23.39 mm [.92 in]; 21.59 mm [.85 in]; 15.62 mm [.62 in]; 11.43 mm [.45 in]; 7.94 mm [.31 in]; 7.92 mm [.31 in]; 6.35 mm [.25 in]; 1.80 mm [.07 in]; R3.18 mm [R.13 in] |
| Clamp Tightening | 5/16in (8mm) nut drive |
| Installation Tools | 3mm hex key and 7mm nut drive for M4 hardware |
| Replacement Clamps | HCLAMP1 small stainless steel clamp [2pkg]; HCLAMP2 large stainless steel clamp [2pkg] |
| Pole Diameter Range | 1.5in - 7in (3.8cm to 17.8cm), small clamp |
| Enclosure Screw Type | M4-0.7 x 20mm |
| Maximum Pole Diameter | 7" (178 mm) |
| Minimum Pole Diameter | 1.5" (38 mm) |
| Replacement Screw Pack | SCPMB1-20 (M4-0.7 x 20mm SHCS [20pkg], M4-0.7 serrated flange lock nut [20pkg]) |
| Other Mounting Surfaces | Can also be mounted to square or rectangular shapes |
| Recommended Hardware Torque | 11.5-13.5 lbf-in (130-150 cN-m) |
| Material | Stainless steel (all parts) |
Business account holders get access to exclusive pricing, volume discounts, and dedicated support. Create a free account to get started.
1555BF, 1555CF, 1590ZGRP081, 1590ZGRP082, 1590ZGRP083, 1590ZGRP084 and 1590ZGRP131.
With the small clamp, poles from 1.5in to 7in (3.8cm to 17.8cm) in diameter. It can also be mounted to square or rectangular shapes.
2 brackets, 2 clamps and hardware, all made from stainless steel.
A 3mm hex key and 7mm nut drive for the M4 hardware, and a 5/16in (8mm) nut drive to tighten the clamps.
The drawing recommends 11.5-13.5 lbf-in (130-150 cN-m).
Hammond Manufacturing · 001100
Hammond Manufacturing · 001102
Hammond Manufacturing · 001104
Hammond Manufacturing · 001106
Hammond Manufacturing · 001111
