The PMB110127KIT3 is a stainless steel pole mount kit for the larger 1556 and 1557 enclosure profiles. It uses the 110–127 mm brackets with the small clamp (HCLAMP1) to secure 1557H, 1557HA, 1557G, 1557GA, 1556H or 1556HA enclosures to poles 1.5 in to 7 in (3.8 cm to 17.8 cm) in diameter. The drawing notes it can also be mounted to square or rectangular shapes.
The purchased kit includes 2 brackets, 2 clamps and hardware, with every part made from stainless steel. Hardware for these enclosures is #8 self-tapping screws with washers: the screw type is #8 x 3/8", and SCPMB5-20 is the replacement pack (#8 x 3/8" SHCS and #10 flat washers, 20 of each).
Following the 1556/57 instructions, each bracket is attached with a washer and screw to the enclosure's outer wall mount holes using a #2 Phillips head, torqued to 150 cN.m (13.5 lbf.in). The clamps are threaded through the desired bracket slots, wrapped around the pole and threaded back through the bracket, then tightened with a 5/16 in (8 mm) nut drive while the enclosure is held against the pole. The drawing gives a recommended hardware torque of 11.5–13.5 lbf-in (130–150 cN-m).
The bracket is 157.00 mm [6.18 in] overall on the drawing. PMB110127KIT3 ships in a bag at 0.97 lbs (0.44 kg) and is RoHS and REACH compliant. Note that the manufacturer states the 1556 series is not designed for outdoor use. For poles up to 15 in, choose PMB110127KIT4.
| Type | Pole Mounting Kit |
| Description | 7" pole mount kit for 1556, 1557 |
| Kit Contents | 2 brackets, 2 clamps and hardware (#8 self-tapping screws and washers) |
| Kit Designation | 110–127 mm Pole Mount Kit, Small Clamp |
| Short Description | 7" POLE MOUNT KIT |
| Size (L X W X H) | 11 in x 5.5 in x 1 in (279 mm x 140 mm x 25 mm) |
| Bracket Overall Length (Drawing) | 157.00 mm [6.18 in] |
| UPC | 623980987132 |
| UNSPSC | 39121301 |
| Screw Type | #8 x 3/8" |
| Mounting Holes Used | Outer wall mount holes |
| Large-Clamp Equivalent | PMB110127KIT4 |
| Replacement Screw Pack | SCPMB5-20 (#8 x 3/8" SHCS [20pkg], #10 flat washer [20pkg]) |
| Compatible 1556 Enclosures | 1556H, 1556HA |
| Compatible 1557 Enclosures | 1557H, 1557HA, 1557G, 1557GA |
| Clamp | Small clamp (HCLAMP1) |
| Hardware Tool | #2 Phillips head for #8 hardware |
| Assembly Torque | 150 cN.m (13.5 lbf.in) |
| Pole Diameter Range | 1.5 in to 7 in (3.8 cm to 17.8 cm) |
| Clamp Tightening Tool | 5/16 in (8 mm) nut drive |
| Other Mounting Shapes | Can also be mounted to square or rectangular shapes |
| Recommended Hardware Torque | 11.5–13.5 lbf-in (130–150 cN-m) |
| Packaging Type | Bag |
| Shipping Weight | 0.97 lbs (0.44 kg) |
| Material | Stainless Steel (all parts) |
| Note | The 1556 series is not designed for outdoor use |
| RoHS Compliant | Yes |
| REACH Compliant | Yes |
Business account holders get access to exclusive pricing, volume discounts, and dedicated support. Create a free account to get started.
1557H, 1557HA, 1557G, 1557GA, 1556H and 1556HA.
1.5 in to 7 in (3.8 cm to 17.8 cm) with the small clamp. PMB110127KIT4 extends that to 15 in.
#8 x 3/8" self-tapping screws with washers, installed with a #2 Phillips head to 150 cN.m (13.5 lbf.in). The replacement pack is SCPMB5-20.
The brackets, washers and screws install to the enclosure's outer wall mount holes.
The manufacturer notes that the 1556 series is not designed for outdoor use.
Hammond Manufacturing · 001100
Hammond Manufacturing · 001102
Hammond Manufacturing · 001104
Hammond Manufacturing · 001106
Hammond Manufacturing · 001111
