The 1598DGY is a light gray flame retardant ABS instrument case from the 1598 Series, a desktop electronic instrument enclosure built around a clam shell body with separate end panels and ideally suited for mounting printed circuit boards. This 1598D size measures 7.09 in (180 mm) long, 8.07 in (205 mm) wide and 2.48 in (63 mm) deep in the series ordering table, which makes it a broad case with room for a board up to about 166 x 191 mm.
The halves are molded from flame retardant ABS plastic rated UL94 V-0, and they are secured with M3 x 0.5 x 10 mm (0.39") Phillips machine screws threaded into tapped integral brass bushings, so the case stands up to applications where repetitive assembly and disassembly are required. The front and rear panels are 1.6 mm (0.064") brushed aluminum (alloy 5052-H32) with protective paper on one side. The enclosure is designed to meet IP54.
Inside, two sets of vertical 1.5 mm (0.062") PC board guides are molded into the front and rear of the case halves, and integral horizontal PC card mounts sit on Eurocard centers. The maximum board size is 166.30 mm [6.547 in] x 191.48 mm [7.539 in], aligned on bosses with 8 mounting holes of Ø3.51 mm [.138 in]. The molded standoffs take #6 x 1/4" (6.4 mm) screws, which are not included; order 1598ATS100 (100-pack). Inner height is 59.00 mm [2.323 in].
The purchased assembly includes the top and bottom cover, front and rear end panels (aluminum), 2 cover screws and 4 rubber feet. A tilt bail kit, 1598TH2, is listed for this size. Enclosures can be factory modified with milling, drilling and printing, and STEP or IGES solid models are available from the factory. Some chemicals can damage ABS, so review the Chemical Resistance Statement. Shipping weight is 0.97 lbs (0.44 kg).
| Type | Instrument Case |
| Series | 1598 Series ABS Plastic Instrument Enclosures |
| Version | Flame retardant |
| Case Size | 1598D |
| Body Style | ABS clam shell body with end panels |
| Description | enclosure - plastic |
| Part Number | 1598DGY |
| Short Description | PLSTC INSTR CASE |
| Inner Box Width | 195.31 mm [7.689 in] |
| Inner Box Height | 59.00 mm [2.323 in] |
| Inner Box Length | 167.30 mm [6.587 in] |
| Depth (Ordering Table) | 2.48 in (63 mm) |
| Width (Ordering Table) | 8.07 in (205 mm) |
| Length (Ordering Table) | 7.09 in (180 mm) |
| Overall Width (Drawing) | 205.10 mm [8.075 in] |
| Nominal Size (L X W X H) | 7.08 in x 8.08 in x 2.5 in (180 mm x 205 mm x 64 mm) |
| Overall Height (Drawing) | 63.20 mm [2.488 in] |
| Overall Length (Drawing) | 179.75 mm [7.077 in] |
| Front/Rear Panel Viewing Area Width | 193.60 mm [7.622 in] |
| Tilt Bail | 1598TH2 |
| Rubber Feet (Pkg 24) | 1421T2 |
| Plastic End Panels (Pair) | 1598PLDBK |
| Aluminum End Panels (Pair) | 1598PLD-AL |
| EMI/RFI Shielded Alternative | 1598RDBK (black, 1598R series) |
| Replacement Cover Screws (100-Pack) | 1591MS100 [M3 - 0.5 x 10 mm] |
| UPC | 623980794716 |
| UNSPSC | 39121301 |
| P.C. Board | Not supplied |
| PCB Mounting Holes | Ø3.51 mm [.138 in] x 8, board aligned on bosses |
| PCB Mounting Screws | #6 x 1/4" (6.4 mm), not included; 1598ATS100 (100-pack) |
| Vertical PC Board Guides | Two sets, 1.5 mm (0.062"), molded into front and rear of case halves |
| Horizontal PC Card Mounts | Integral, on Eurocard centers |
| Max. P.C. Board Width (Mm) | 191.48 |
| Max. P.C. Board Length (Mm) | 166.3 |
| Maximum P.C. Board Size (Drawing) | 166.30 mm [6.547 in] x 191.48 mm [7.539 in] |
| Assembly Includes | Top and bottom cover, front and end panels, 2 cover screws, 4 rubber feet |
| Packaging Type | shrink wrap |
| Shipping Weight | 0.97 lbs (0.44 kg) |
| Color | Light Gray |
| Finish | Matte textured |
| Material | ABS Plastic (flame retardant) |
| CAD Models | STEP or IGES solid models available from factory |
| Cover Fastening | M3 x 0.5 x 10 mm (0.39") Phillips machine screws into tapped integral brass bushings |
| Chemical Resistance | Avoid acetone, ketones, ethers, aromatic and chlorinated hydrocarbons, thread locking compounds, cutting or tapping fluid, water detection paste, anti-seize paste, strong solvents and some greases and oils |
| Assembly Suitability | Suited to repetitive assembly and disassembly |
| Factory Modification | Milling, drilling, printing, etc. |
| Front And Rear Panels | 1.6 mm (0.064") brushed aluminum, alloy 5052-H32, protective paper (SPV coating) on one side |
| IP Rating | IP54 |
| Flame Rating | UL94 V-0 |
| RoHS Compliant | Yes |
| REACH Compliant | Yes |
Business account holders get access to exclusive pricing, volume discounts, and dedicated support. Create a free account to get started.
The part page lists 7.08 in x 8.08 in x 2.5 in (180 mm x 205 mm x 64 mm). The series ordering table gives 7.09 in (180 mm) long, 8.07 in (205 mm) wide and 2.48 in (63 mm) deep, and the drawing shows overall 179.75 mm [7.077 in] x 205.10 mm [8.075 in] x 63.20 mm [2.488 in] with an inner box of 167.30 mm [6.587 in] x 195.31 mm [7.689 in] x 59.00 mm [2.323 in].
The drawing gives a maximum P.C. board size of 166.30 mm [6.547 in] x 191.48 mm [7.539 in], aligned on bosses with 8 mounting holes of Ø3.51 mm. The board is not supplied.
Yes. It is molded from flame retardant ABS plastic with a UL94 V-0 flammability rating.
Yes. The halves are joined with M3 x 0.5 x 10 mm Phillips machine screws threaded into tapped integral brass bushings, which the manufacturer describes as suited to repetitive assembly and disassembly. Replacement screws are 1591MS100 (100-pack).
No. The molded PC card standoffs take #6 x 1/4" (6.4 mm) screws, which are not included; they are available as 1598ATS100 in a 100-pack. The assembly does include 2 cover screws and 4 rubber feet.
Yes. The series ordering table lists tilt bail kit 1598TH2 for this size.
Hammond Manufacturing · 001100
Hammond Manufacturing · 001102
Hammond Manufacturing · 001104
Hammond Manufacturing · 001106
Hammond Manufacturing · 001111
